Sulfuric acid slag is a major problem in today's environmental protection, but it makes resources to benefit the country and the people. Everyone's current sulfuric acid slag iron ore concentrate process is mainly based on magnetic separation, and there are three problems: 1. The phase of sulfuric acid slag, impurities, environmental restrictions and the actual situation of the enterprise and the demand for products after the selection of sulfuric acid slag are different; 2. The content of Fe 2 O 3 in the sulfuric acid slag is high (magnetic selection is mainly suitable for selecting high magnetic Fe 3 O 4 ), and the magnetic properties are low. Therefore, the tailings contain more than 90% of the original slag; 3. The grade of iron ore products completely dependent on magnetic separation is between 55% and 59%. The effect of impurities such as desulfurization is too poor, and the quality of finished products is obviously off the bottom. Therefore, if the iron ore market enters the adjustment period, the sulfuric acid slag selected iron ore quotient will be unsalable due to backward technology and low grade of fine iron powder, which will lead to a backlog of sulfuric acid slag in the sulfuric acid plant. At present, important methods for the selection of domestic sulfuric acid slag include: combined magnetic separation method, alternating magnetic separation, re-election method, chemical leaching method, flotation reverse flotation method, microbial desulfurization method, magnetic separation column sorting method, magnetization Reduction roasting method, rotary kiln processing method, and the like. These methods have their own strengths, but some methods have high cost of investment and sorting, some methods are complicated to operate, and some methods are subject to environmental constraints. According to the characteristics of the slag, the beneficiation and purification should adopt the method of large processing capacity, simple equipment, easy operation and low investment, and it is not suitable for applying complicated processes. Each of the above processes has its own characteristics, and the selection of the treatment process is selected according to the phase of the sulfuric acid slag, the impurity, the environmental constraints, and the actual conditions and product requirements of the enterprise. Galvanized Hexagonal Mesh,Galvanized Hexagonal Wire Netting,Hexagonal Iron Wire Mesh,Galvanized Hex Wire Mesh ANPING HAOYU METAL MESH CO.,LTD. , https://www.haoyuweldedmesh.com