The trends of the metal recycling industry
Unlike many other materials, most metal more than pays for its own recycling in the consumer and industrial waste. because the demand for metal scrap continues to rise and recycling metal saves more than 90 per cent of the energy required versus producing new metal.
What is the role of metal baler in metal scrap recycling?
The metal scrap can be directly pressed into bales by using the hydraulic metal baler from China factory YMSRECYCLING to make the high efficient metal recycling and increase the value of residual steel scrap.
Recycling metals also requires less energy than producing new metals. Also conserves natural resources. Recycling conserves diminishing natural resources.
How to choose a suitable metal baler?
The Y81 series Scrap Metal baler could press all ferrous metals from steel to stainless steel can be recycled as well as non-ferrous metals such as copper, brass, and aluminium, with various sizes for option, high-density compression, compact and strong. Low energy consumption but fast production rate.
Y81 series hydraulic metal baler mainly include the following models.
Y81F (side turn discharge ), Y81T (side push discharge), Y81Q (front push discharge) and Y81S (Double main press ).
Y81F-Manual operation (Side turn discharge )
Y81F-Semi-automatic operation (Side turn discharge )
Y81T-Semi-automatic operation (Side push discharge )
Y81S-Semi-automatic operation (Double main press discharge )
We provide a variety of models of the hydraulic metal baler, With new technologies to raise the quality and reduce the price, which supports 24 hours fully automatic working environment.
CONTACT YMSRECYCLING
Metal Baler,Aluminum Metal Recycling Baler,Automatic Aluminum Waste Metal Baler,Steel Metal Baling Press Machine Jiangyin Yimaisheng Hydraulic Machinery Co., Ltd. , https://www.ymsrecycling.com
1, the peak impact force should not exceed 6kN;
2. The extension length or fall distance should not be greater than the value of the product identification;
3, should not appear ribbon tear, open wire, broken pieces of metal, open the connector, rope off, analog people slip, buffer (rope) off phenomenon 4, after the crash stopped, the simulation is not suspended in the air There should be a simulation of head-down phenomenon;
5. After the fall and fall, the seat belt should not exhibit obvious asymmetric slip or asymmetrical deformation;
6. After the crash stops, the connecting point of the safety rope with the main belt should be kept on the back or waist of the simulated person when the simulated person is suspended in the air, and should not be slid to the underarm and waist;
7. After the crash stops, the simulated person's armpits and the inside of the thighs should not have metal parts when they are suspended in the air;
8. After the crash has stopped, the simulator should not have any components to oppress the simulated human throat when it is suspended in the air.
9. After the fall is stopped, the slippage of the webbing or rope within the adjustment buckle should not exceed 25mm.
Overall static load:
1. The overall static tension should not be less than 4.5kN. Should not appear webbing tearing, open wire, broken pieces of metal, connector open, rope broken, plastic deformation of metal parts, simulated human slippage and other phenomena;
2. The seat belt should not exhibit obvious asymmetric slip or asymmetric deformation;
3, simulation of the armpits, inner thighs should not have metal parts;
4. There should not be any parts to oppress the simulated human throat,
5. The slippage of the webbing or rope within the adjustment buckle should not exceed 25mm.
This article is the original article of Qingdao Zhongbang Instrument Co., Ltd. If you need to reprint it, be sure to add the source of the description. Reproduce the misappropriation without permission.
The economics of metal scrap contributes to its position as one of the most recycled metals in the World.
We also support the design and manufacture of other model versions upon request.
Y81Q-Manual operation (Front push discharge )
YMSRECYCLING offer economical and effective solutions to help you to process different metal scraps.
The Metal Baling Press can be customized and extended according to the actual needs of your on-site.
Call us now on +86-15950122559
To start maximising your returns from your metal scrap recycling.
Please email sales@ymsrecycling.com or visit our website directly for further information about the products you are interested in.
Overall dynamic load: