Common problems are as follows: First, we must understand the working principle of suction truck vacuum pump. The more important work principle is the consideration of the source of power and stability. The vacuum pump power comes from the chassis engine. The engine is transmitted to the vacuum pump via gearboxes, power take-offs and driveshafts. During the suction operation, the vacuum pump extracts the air in the sealed tank to form a negative pressure. The atmospheric pressure outside the tank is used to press the dirt into the tank through the suction pipe. When the sewage is drained, the vacuum pump will put atmospheric pressure outside the tank into the tank and use the air pressure to discharge the dirt out of the tank (the vacuum pump's continuous working time generally does not exceed 30 minutes). The flow sequence of the air flow in the air path is as follows: When the air is sucked, the vacuum pump sucks the air with a certain humidity in the tank into the water and gas separator, where the water is separated and flows back into the tank. The gas enters the vacuum pump along the pipeline through the four-way valve. Air intake. The pump is mixed with the lubricating oil and is discharged from the exhaust port through the compression chamber. In particular, the mixture is initially separated by the primary filter, and the separated oil flows back to the oil pump. The mixture is further separated by an oil separator and then discharged into the atmosphere through a four-way valve. Manual operation of the four-way valve can change the direction of the air flow, sucking and discharging freely. When the vacuum pump of the suction truck is completed, it is necessary to formulate a corresponding inspection of the suction truck according to the different working intensity of each time, so as to ensure the working life of the suction truck and the second working efficiency.
Polypropylene is a thermoplastic belonging to the polyolefin group. Wuxi Yuda Plastic Welding Machinery provides welding equipment to handle all diameter sizes offered and has an extensive line of fusion machines available to buy for every application. Polypropylene pipe can be bent in the field, also polypropylene fabrication of plastics can be made like HDPE in workshops.
Polypropylene (PP) Pipe and Fittings assembly and joining of this system is performed by heat fusion. Fusion joints are made by heating and melting the pipe and fitting together. This type of joint gives a homogeneous transition between the two components without the lowering of chemical resistance associated with solvent cement joining and without the loss of integrity and loss of pressure handling ability of a threaded joint.
Five different fusion methods for Polypropylene Piping Systems are available and commonly used in today`s demanding applications. These include conventional socket fusion, electrofusion, conventional contact butt fusion.
For Polypropylene Pipe Fabrication, it can use Yuda Workshop Fitting Welding Machines and Plastic Pipe Saw. Polypropylene (PP) is a partly crystalline thermoplastic similar to HDPE. Both of them have same welding process but in different welding temperature. For more information for PP Fusion Welders, feel free to contact Wuxi Yuda Plastic Pipe Welding Machinery Factory
Polypropylene Fabrication,Hdpe Pipe Fabrication,Polyethylene Welder,Polypropylene Welding Machine WUXI MEIERTE MACHINERY TECHNOLOGY CO.,LTD , https://www.wxpipefusionweldings.com
In many cases, users have overlooked a problem that is, the correct operation of suction trucks, do not operate in violation of the rules, so that your suction truck can last long without problems.