The popularity of the intelligent parking system is getting higher and higher, which brings great convenience to the management of the parking lot. The parking management system we usually use may have some troubles, and the "zero complaint" Doyle has been improving. The service level is completely controlled by the vehicle, but there is no automatic braking method. What is the problem?
Insufficient power supply, insufficient vehicle detector power or low sensitivity. Poor contact, grounding sensor COM port and channel brake controller grounding are not bad or disconnected.
Our smart parking system has image contrast, but the monitor screen can't monitor the vehicle image. What's going on? Check if the surveillance camera is installed correctly, such as whether the graphics card driver is installed properly, whether the camera has power, and whether the connection with the graphics card is normal. If the surveillance camera is working properly, check the software parameter settings of the smart parking system to turn on the camera.
Why does the driver press the "card" button, the card reader does not respond or has an action, but does not make a card, how to solve it? If the card machine does not respond, the card may be out of contact or the plug is broken, another reason is that the card machine is not in the card On, this should be checked.
If the card does not move, this may be stuck, check if the exit slot is blocked or too small.

Natural Latex Tube

Natural Latex Tube,Latex Rubber Tube,Colorful Resistance Rope,Latex Resistance Rope

Changzhou Golden Oak Rubber Plastic Polymer Co.,Ltd , https://www.jnspullrope.com