Metal Shelf,Metal Storage Shelves,Wire Hanging Shelves,Metal Hanging Shelves Hangzhou Freefish Import & Export Co., Ltd. , https://www.fltdframe.com
Detailed description of our 6 meter thick-line interlock wire cutting machine
A. Equipment structure:
1.   Mainframe of thick-line cutting wire machine (including electronic control box) towing power DC2HP motor 1 unit
400W servomotor (Japan Mitsubishi) + reducer (made in Taiwan) will be the power of cutting wire (located inside of machine) ............................. .1 set.
2.    6 meter conveyor DC 2HP motor--------------------------------------1 unit
B,Equipment instruction:
6 meter thick-line cutting wire machine
         1. Cutting wire speed: 150m every minute, every minute at most up to 150 pcs.
2. Cutting way: round type: 6mm-11mm, flat wire: thickness 3mm-6mm*width15mm-24mm.
3. Minimum length: 600MM                           Â
4.   Precision of cutting wire: Under the condition that tension is stable cutting within 2m±2mm,  cutting within 5 meter ±5mm, cutting within 10 meter ±8mm.
5.Way of getting wire: Wire-pushing type or wire-hitting type
6.Voltage : 380V (single-phase) 50HZ or  60HZ
7.Bench direction: right-hand machine  or left-hand machine        Â
8.Painting:    NO.2  Apple  green
9.Area of attachment:(L7500M*W2000MM*H1800MM)
10.Total  power:  13KW
C,Device accessories:
1.Cutter (for cutting wire ) -------------------------------1 pc                           Â
2.Bakelite round (for cutting wire)-----------------------1 group
3.Plain belt 40*790 (towing)----------------------------2 pcs                            Â
4.plain belt 24*1280 (getting wire)----------------------1 pc
5.plain belt 24*1310 (getting wire)--------------------- 1 pc                             Â
6.toolbox --------------------------------------------------1group
1. Application: Applicable to multi-core cored wire stranding of over two strands.
2. Main characteristics:
-Machine model: SSST800
-Application: applicable to multi-core cored wire stranding of over 2 strands
-Suitable wire diameter: 1-4mm
- Finished outside diameter: 12MM
- stranding limit: applicable to multi-cored wire assembly of more than two strands.-
- rotating speed maximum 600RPM,below 550RPM when stable operation
- wire feeding diameter Φ1~4mm(cored wire)Â
- assembly wire diameter  Φ12MM(cored wire, maximum)
- diameter of capstan:  Φ300MM 4 grooves the surface of aluminum alloy anode treatment .
- pitch 30mm---150mm(gear type replace pitch, one pitch about at intervals of 20mm)
- stranding direction Both left and right stranding direction
- coiling shaftΦ630*420*100mm and Φ800*600*100mm
-  upper and lower shaft electric hydraulic lifting
- tension regulation motor 5.5KW
- Traversing: track thread screw type discharging wireÂ
l- Driven motor 30HP motor
Â
Main technical data about our wire cutting machine
Cutting wire speed
150m/m, every minute at most up to 150 pcs.
Cutting way
round type: 6mm-11mm, flat wire: thickness 3mm-6mm*width15mm-24mm.
Minimum length
600MM
Precision of cutting wire
Under the condition that tension is stable cutting within 2m±2mm, cutting Â
within 5 meter ±5mm, cutting within 10 meter ±8mm.
Way of getting wire
Wire-pushing type or wire-hitting type
Voltage
380V (single-phase) 50HZ or  60HZ
Bench direction
right-hand machine or left-hand machine
Painting
apple green or designated by customer
Total  power
13KW
3. We can make a variety of cable machines as following:
1. Extrusion line
Chemical foaming extrusion line
Physical foaming extrusion line
Cored wire insulation extrusion line
Jacket extrusion line
Single twisting machine
Cantilever single twisting machine
High-speed single twisting machine
Horizontal high-speed single twisting machine
Vertical high-speed single twisting machine
Double twisting machine
Copper stranding machine
Bow-type stranding machine
Planetary stranding machine
Cage stranding machine
Crosswire stranding machine
Rigid frame stranding machine
Tubular stranding machine
Drum stranding machine
Triple-core stranding machine with back twist
Caterpillar haul-off unit
Taping machine
Numerical control horizontal single/double layer taping machine
Numerical control vertical single/double layer taping machine
Vertical micro-fine double-layer taping machine
Central taping machine
Wire cutting machine
Computerized automatic coiling machine
Packing machine
Take-up&pay-off
Testing equipment
Spark tester
Inductive wire preheater
Laser diameter gauge
Meter counter
Crossheads for extrusion line
Bobbins
Accessories
Reels
Crossheads for extrusion line
Magnetic powder clutches & brakes
Tensioner
Other spare parts
4. Q&A
1. Are you the manufacturer or trading company?
We are the 100% manufactuer with 3 big workshops covering over 100, 000.00 square meter. Warmly welcome you to visit our factory and conduct our work.
2. What's your factory's advantage over other manufacturers in the same industry?
- High output capacity will guarantee your high-efficient production
- We are very good at engineering. In order to make our machine have a very excellent performance, we are rigorously attaching importance to each detail in the course of manufacturing in a bid to improve our machines continuously.
- We only mount electrical components under famous brands like Siemens, Yaskawa, Scheinder and Omron on our machines to guarantee the quality of our machines.
- Our engineers and workers can work abroad, if you need us to assist you installing and testing the machines or training your staff how to operate and maintain our machines, we can send our team to your factory when our machines arrive at your factory.
- Guarantee period: We can guarantee one year for all our machines.
- After-sales service: We promise to provide permanent technical support and after-sales service with our customers.
3. Why do we trust your company?
We are gold supplier for many years and have agent in Europe. Up to now, we have exported our machines to many countries.Â
Referential photos
