Automatic Sliding Door Operators High quality door residential automatic door opener
Carton+Foam+Bubble Bag and Pallet
Safety & Operation Devices of High Speed PVC Roll up Door:
In consideration of operation safety for high speed PVC roll up door, we provide the photo cell, and wireless safety airbag device as the standard safety device; And to enrich the operation methods of the high speed door, various options are provided such as manual button, transmitter, control box, radar sensor and inductive loop device. Different styles of transparent window are also available for better vision view.
Varied Running Speed of High Speed PVC Roll up Door:
Running speed of High Speed PVC Roll up Door is adjustable: Opening speed from 0.80m/s to 2.0m/s, and closing speed from 0.6m/s to 1.0m/s. Running speed adjustment can be achieved through inverter inside the control box, t to meet the actual needs.
Driving System of High Speed PVC Roll up Door:
Driving system is the core part for the high speed roll up doors. For the motors, we can provide multiple options for different demands, brands including SEW, SIEMENS, SNMA, SEJ and Servo Motor; All the motors are provided with manual brake, that offers emergency operation under power failure. Furthermore, motor power can be applied based on the real door size, in supply voltage 220V single phase and 380V three phase.
sliding door operators, automatic door motor opener, door accessory ,automatic door operators,fast door accessory SHENZHEN HONGFA AUTOMATIC DOOR CO., LTD , https://www.hongfafd.com
The safety tester measures the voltage resistance of high-voltage elements and devices (using AC/DC withstand voltage meters). Such as silicon heap. It should be noted that the DC high voltage output is negative and the ground is positive. When testing the capacitor, there is a charging process when a voltage is applied across the capacitor. At this time, there is a charging current in the test circuit. When the current is greater than the set leakage current value, the withstanding voltage tester will alarm, causing the test to be interrupted. Can not be carried out. Therefore, when the safety tester is testing, it should slowly increase the voltage, and the charging current is less than the set leakage current value until the specified test voltage is tested. Can not be fixed voltage, reset - start the way to test. In the AC circuit, it is equivalent to the resistance in the DC circuit. Therefore, the safety tester generates a current in the AC circuit. When the current is greater than the set leakage current value, the Hipot tester will alarm, making the test. Interrupted, unable to proceed. Therefore, before the test, the capacitive reactance (Xc) of the capacitor should be calculated first, then the loop current value under the test voltage should be calculated, and then the preset value of the leakage current of the withstand voltage tester should be adjusted to make it slightly larger than the loop current value. carry out testing. J) Testing components such as cables that have large distributed capacitance (equipment) should be equivalent to capacitor testing.