Product Name: NE type bucket elevator The process of making pipes using this machine involves pouring a mixture of cement, sand, aggregates, and water into a mold. The mold is then vibrated vertically to remove air bubbles and ensure even distribution of the mixture. The reinforcement cage is then inserted into the mold, and the mixture is vibrated again to ensure that it covers the cage evenly. Vertical Vibration,Vertical Vibration Machine,Vertical vibration concrete pipe making machine ,Casting Pipe Vertical Vibration Taizhou Amitycare International Co.,Ltd. , https://www.tzamity.com
NE series bucket elevator features NE series plate chain hoist is a new product developed by our company on the basis of similar foreign products. It is used to upgrade all kinds of bulk materials and is a relatively advanced vertical lifting equipment in China. , It can be widely used to improve all kinds of bulk materials, such as: ore, coal, cement, cement clinker, grain, fertilizer, etc. In various industries, this type of hoist is widely used and has become an alternative due to its high efficiency and energy saving. HL and TH type chain hoists can be selected.]. The specifications are: NE15, NE 30, NE50, NE100, NE150, NE200, NE300, NE400, NE500, NE600, NE800. The conveyor chain is a sleeve roller chain, which induces gravitational discharge and is used for the vertical lifting of various powdery and massive particles. Product Features 1. Raise the range of light. The requirements for material types, characteristics, and blockiness are small, not only to enhance the general powder, granular and bulk materials, but also to improve the materials for grinding properties. Material temperature up to 250 °C.
2. Small drive power. The machine adopts inflow feeding, gravity-induced unloading, and adopts a intensively arranged large-capacity hopper for conveying. Low chain speed increases the amount. There is almost no return and excavation, so there is little production power and the power consumption is 70% of the chain hoist.
3. Large transport capacity. The series has 11 specifications. Lift range 15~800m 3 /n.
4. Long service life. The design of this machine ensures that the materials will not be spilled during feeding, lifting and unloading, which will reduce the mechanical wear and the phenomenon of extrusion and collision between the materials will seldom occur. The conveyor chain uses high-strength wear-resistant chains, which greatly extend the service life of the chain and chain bucket. Under normal use, the life of the conveyor chain exceeds 5 years.
5. Good sealing and less environmental pollution. The advanced design principle ensures the reliability of the whole machine, and the time of no failure exceeds 30,000 hours.
6. Operation, maintenance, easy maintenance, less wearing parts. Due to the low energy consumption and maintenance, the use cost is extremely low.
7. The machine is small in size, and the chassis is folded and pressed in the middle. After welding, the rigidity is good and the appearance is beautiful. The main components structural characteristics 1. Upper device: Installed track (double-row), to prevent the chain from swinging, backstop, to prevent the hopper from rotating, the material blocking the lower part of the shell, the discharge port is equipped with a rubber plate to prevent back material.
2. Intermediate section: Some intermediate sections are equipped with rails (double-row sections) to prevent the chain from swinging during operation. Some intermediate sections are equipped with access doors for maintenance.
3. Lower device: A tension device is installed. NE15~NE50 are spring-tensioned and NE100~NE800 are tensioned using a weight box.
4. The upper and lower sprocket wheels use ZG310-570. Overall conditioning, HB229-269 tooth surface quench HRC40~48.
5. Plate chain: 45 # HRC36~42