Iron ore beneficiation equipment installation precautions

Iron ore is the main raw material of the steel industry, it is also a pillar of the national economy. Iron ore is also widely used and has become a necessary basic material for society and the public. Then, as the owner of the selected iron ore mine, after purchasing a set of iron ore beneficiation equipment based on its own ore conditions and environment, it is presumed that everyone is most concerned about the post-installation after-sales service and maintenance work. Here are some precautions for the installation of iron ore beneficiation equipment:

1. After the purchase, the equipment manufacturer will send a technician to the customer site to carry out the installation work according to the site, and check and install according to the installation foundation map of each equipment.

2, grinding, crushing, magnetic separation and other equipment lubrication problems should be done well, good lubrication has a great relationship to the bearing life, it directly affects the machine's service life and operating rate, so the required lubricant must be injected Cleaning, sealing must be good, the main oil filling of this machine: rotating bearings, roller bearings, all gears, moving bearings, sliding plane.

3, the installation should pay attention to the ground plane of each device, the installation of the corner screw, to be tightened, to be adjusted.

4. The installation should be placed on the undercarriage plane of the movable device. The movable bearing should not be moved on the chassis when the machine encounters unbreakable materials, resulting in serious accidents.

5. Check whether the work of each part of the machine between the various machines is working properly. It is best to test the machine several times without the presence of a technician.

6, work should pay attention to check the wear level of wearable parts, always pay attention to replace the worn parts. If there is impact sound when starting up, it should be stopped immediately and checked before being removed.

Tower Crane Pulleys

There are many types of Tower Crane Pulleys, to divided in the material, there are Tower Crane Nylon Pulley and Steel Pulley; to divided in the application, there are Wire Rope Pulley and Cable Pulley. For the size and demension of tower crane pulleys, we can manufacture as customer's demand. Wellcome to consult us for more details.