Ningbo Jingcheng Meter Co., Ltd. is a professional Vertical Water Meter manufacturer. Vertical Water Meters,Domestic Flow Meter,Dry Type Water Meters,Vertical Mechanical Water Meters Ningbo Jingcheng Technology Co., Ltd. , https://www.jingchengmeter.com
As a worker operating the machine tool, follow these requirements:
1, according to the requirements of dress. Open clothing must be fastened, cuffs tight, and long hair fortresses in caps. Remember to wear gloves when working on machines with rotating parts.
2. When measuring the working size, stop and measure and move the tool holder to a safe position.
3, the workpiece and the tool to install a solid, deep part of the knife head can not be too much.
4. Stripped chips and spiral cutting chips should be removed in time using hooks. Do not use hand pulls.
5. It is forbidden to place tools, measuring tools, fixtures and workpieces on the bed or gearbox to prevent falling.
6. When cutting brittle materials such as cast iron and brass, to prevent hot chips from flying out of wounds, wear protective glasses and use transparent shield guards.
7. When operating the grinding machine, attention should also be paid to the selection of the grinding wheel and the installation requirements of the grinding wheel to prevent the grinding wheel from chipping and flying out of the wound.
Mechanical
Water Meters are used the mechanical transmission structure. Measuring,
memorizing and displaying the volume of cold water passing through the
pipeline. They are widely used due to the simple structure and cheap
price. Jingcheng Mechanical Water Meters are used worldwide by municipal
utilities, companies and water suppliers.
Please feel free to contact us if you need any Vertical Water Meter.
The protection against machine tool hazards requires the installation of protective devices such as guards, guard rails, and guard rails, as well as reasonable design, reliable installation, and non-influenced operation; it also requires the installation of safety devices such as overloaded safety devices, trip safety devices, etc. Braking device, anti-misoperation sequence action device, etc. There must also be a power off switch. In addition, sufficient lighting is used on the production site, and each machine tool should have appropriate local lighting and maintain a certain safety distance. For machines whose noise exceeds the national standards, noise reduction measures should also be taken.