From the convening of the China Bus Academic Annual Conference, it is understood that the new energy operation bus rating will be completed in the first quarter of 2015.
According to the latest statistics, in 2014, the sales volume of bus passengers in China was 84,000, which was 57% of the annual sales of passenger cars. At the same time, the output of new energy buses in 2014 was 26,000, and buses accounted for about 85%.
It is understood that China's new energy buses are mainly served in the form of buses and business receptions, and have not yet entered the road bus and tourist bus market. According to the analysis of relevant experts, on the one hand, due to the immaturity of the new energy technology in the early stage, the passenger transportation requirements could not be met. On the other hand, the new energy bus could not participate in the rating of the operating bus, and the passenger car type rating proved that the passenger transportation company obtained the road transportation. The necessary conditions for the certificate.
With the continuous maturity of technology, new energy buses have the conditions to participate in road and tourist passenger transport. It is reported that the rating of new energy operating bus is also expected to be completed in the first quarter of 2015. At present, China's new energy operation bus includes plug-in hybrid operation bus and pure electric operation bus. It is estimated that the sales volume of new energy road passenger cars will be about 5,000 in 2015.
Mixing Mill Manchine
Open rubber and plastic mixing is the rubber factory used to prepare plastic rubber, rubber or hot refining, a type of roller exposed rubber refining machinery. This machine is suitable for EVA,rubber,synthetic rubber,hot melt and all kinds of chemistry raw material to mix ,mediate and disperse, and then put into the mass production. It is the best choice to test, make sample and learning in school.
16inch automatic crusher mill
Advantage
1. The roller is made of chilled casting vanadium & titanium alloy iron which is hard and wear-resisting, the surface hardness is above 70degree, the surface coating is about 15mm.
2. Hard tooth gear reducer with well-design structure, low noise, high efficiency and long service life.
3. Self-aligning bearing is well matching with the bearing inside leakage-proof device. The sealers are made of high temperature,wear, oil resistance material,which have very good sealing effect.
4. All main electrics are imported, the alternating current contactor is Shilin brand. The switch and button are Taiwan Tend brand.
5. Circulating lubrication system solves the oil leakage problem. The feature of this system is easy to maintain,easy to replace.
6. This machine is installed with overload protection device which protect the machine will not broken if the machine is overload. The machine will reverse 1/3 round when press the emergency stop button,which sure the production safety.
7. The [U" shape frame is whole set casting, but other factory welded together.
8. The machine base is welded by national standard I steel.
Main parameter
|
Name
|
A Automatic crusher mill
|
|
Front roller diameter (mm)(Smooth roller)
|
400
|
|
Rear roler diameter (mm)(Groove roller)
|
450
|
|
Roller length(mm)
|
840
|
|
Front roller speed (m/min)
|
12.67
|
|
Speed ratio
|
1:1.63
|
|
Max roller gap(mm)
|
10
|
|
Nip adjustment
|
Manual
|
|
Mixing capacity(kg)
|
20
|
|
Power (kw)
|
45-8
|
|
Motor RPM(r/min)
|
740
|
|
Reducer ratio
|
45
|
|
Reducer model
|
315
|
|
Roller bearing diameter(mm)
|
260
|
|
Bearing mode
|
352952YA
|
|
Bearing size(mm)
|
360×260×150
|
|
Name
|
B mixing mill
|
|
(mm) Front roller diameter(smooth roller)
|
400
|
|
Rear roller diameter (mm)(smooth roller)
|
400
|
|
Roller length(mm)
|
840
|
|
Front roller working speed (m/min)
|
19.36
|
|
Speed ratio
|
1:1.5
|
|
Max roller gap(mm)
|
10
|
|
Nip adjustment
|
Manual
|
|
Mixing capacity(kg)
|
20
|
|
Power (kw)
|
37KW
|
|
Motor RPM(r/min)
|
980
|
|
Reducer ratio
|
45
|
|
Reducer model
|
315
|
|
Roller bearing diameter(mm)
|
260
|
|
Bearing model
|
352952YA
|
|
Bearing size(mm)
|
360×260×150
|
Mixing Mill Manchine,Open Mill,Rubber Mixing Mill,Roller Mill
SHIJIAZHUANG LONGXUAN TRADING CO., LTD , https://www.chinaweldingmachine.cn