Today's China must strengthen the establishment of an ecological civilized track system and establish the most perfect environmental protection system. Therefore, establishing and perfecting the strictest condition maintenance system is an inevitable request for exhaust gas treatment in China. So what problems should be noticed in the treatment of exhaust gas under different conditions? The following China's waste gas treatment equipment trading network will tell you:

1, the disposal of combustible gas:

(1) For the emission of flammable gas, if there is a large amount of emissions, we should try our best to select a few people, pay attention to the surrounding area to prevent fire, and provide fire extinguishers, sand and water.

(2) The combustible gas in the cylinder shall be discharged. The task personnel shall stand at the front of the air outlet to stop the operation to prevent the gas from injuring others.

(3) When the extinguishing method is adopted, a pressure reducing valve should be installed to grasp the speed of the combustible gas, and the negative gas should be gradually released as much as possible to extinguish the loss in the extinguishing installation.

2. Inert gas disposal:

Inert gases are of course not risky, but a small amount of inert gas accumulates, causing a decrease in the surrounding oxygen content, which can lead to infarcts.

(1) Appropriate central emissions outdoors.

(2) If the cylinder or instrument is indoors, an exhaust duct may be connected to cause it to be discharged slowly outside.

3, toxic gas disposal:

(1) When dealing with toxic gases, the task personnel must wear gas masks, gloves, etc., and the personnel involved in the maintenance tasks have to do with the disposal tasks to stop entering the poison gas disposal area.

(2) Receptors and adsorbents used in the disposal of toxic gases should be used to ensure their effectiveness.

4. Disposal of combustion gas:

(1) The powder, oil, grease, and flammable materials that are stuck on the container valve or on the utility appliance will be cleaned and cleaned before the help gas can be disposed of.

(2) It is forbidden to dispose of the combustion-supporting gas and combustible gas in the unified central area to prevent the onset of explosion.

(3) There should be no fire source, no extinguishing material and explosive materials around the disposal of the combustion-supporting gas.


Swimming Pool Solenoid Pump,Swimming Pool Dosing Pump

*Swimming pool water treatment: dosing chlorine dioxide

*Industries: e.g. paper industries, plastic industries, tissue industries: dosing additives

*Potable water treatment: dosing disinfectants

*Several types: manual control or automatic control, the automatic control can divided to: 4-20mA electric current signal control, digital impulse signal feedback control, digital impulse feedback control with Rs485 communication interface, 4-20mA electric current signal control with Rs485 communication interface.             

*High speed operation: high measurement precisions, up to 360 strokes per minute which eliminate the pulsation effect.                                                                                                             

*Compact size: small, quiet and stable operation                                                                                                                

*Durable diaphragm: the diaphragm is made by PTFE, which is compatible with all kinds of chemicals. In typical use, the diaphragm can last up to five years, which 5 times as national standard GB/T7782-2008                                                                                                        

*Strong stability: working stability in AC 100-240V, and suitable for the range of 50-60Hz                                                                                                                          

* High protection level: protection level reached to IP65, it allowed pump to provide safe services  at severe operaton condition                                                                                            

*Ball check valves: it through double valve ball, seat and sleeve to form the sealing system, that enhance the precision                                                                                                                                                                   

*Percentage adjustment: local adjust percentage for stroke and frequency 0~100%                                                                           

*Level monitor, low-level shutoff with alarm output

Swimming Pool Solenoid Dosing Pump

Swimming Pool Solenoid Dosing Pump,Swimming Pool Chemical Solenoid Dosing Pump,Ht Series Swimming Pool Solenoid Dosing Pump,Mini Swimming Pool Solenoid Dosing Pump,Swimming Pool Solenoid Pump,Swimming Pool Dosing Pump

Zhejiang Ailipu Technology Co., LTD. , http://www.alipu.com