First, the drive shaft and the pump shaft, the drive shaft and the transmission shaft coupling to the coupling, the two halves of the radial displacement, clearance, axial tilt should comply with the provisions of equipment technical documents. When there is no regulation, it should comply with the current national standard "Construction and Acceptance of Machinery and Equipment Installation Project". Second, the drive shaft and the pump shaft to the belt connection, the parallelism of the two axes, two wheel offset should be consistent with the current national standard "mechanical equipment installation engineering construction and acceptance of the general specification" requirement. Third, the turbine-driven pumps and conveying high temperature, low temperature liquid pump (boiler feed pump, hot oil pump, cryogenic pump, etc.) at room temperature to find positive, should be designed to set aside its temperature changes compensation value.
These parts involve steering box (ZF8098), Steering pump, steering rod and ball joint. LHD truck is different from RHD truck for steering parts. Tanzania, Kenya, South Africa, Zambia, Indonesia and Uganda are the most common RHD truck driving countries. VIN code or Chassis number is the final identification of trucks. If the dealers don`t know the customers` need, please ask for the chassis number and we will confirm the truck model here to avoid any mistakes before ordering parts.
Howo Steering Parts,Ball Joint For Howo Spare Parts,Howo Steering Tie Rod Truck Parts,Howo Tipper Steering Tie Rod Top Lead International Trading Co., Ltd , https://www.topleadchina.com
ã€Print】 ã€Close】