Fully refined paraffin refers to a product obtained by using oil-containing wax as the raw material, degreased by sweating or solvent, and then refined by clay or hydrogenation.
Fully refined paraffin is also called refined white wax. The appearance of fully refined paraffin is white solid, with block and granular products. Its product has a higher melting point, less oil content, no sticking at room temperature, no sweating, no greasy feeling, waterproof, moisture-proof It has good electrical insulation. Because of its high degree of sophistication and low content of fused aromatic hydrocarbons. It has good chemical stability and light, good thermal stability, strong toughness, good plasticity, white color, no mechanical impurities and moisture, and no smell. Fully refined paraffin can be Soluble in: benzene, ether, chloroform, carbon disulfide, carbon tetrachloride, turpentine, petroleum, fixed oils.
Mainly used in high-frequency porcelain, carbon paper, stylus wax paper, precision casting, decorative sound-absorbing board and other products. Also used in packaging, electronics, textile candle crayons, match making and other industries. In addition, manufacturing high-grade candles and various industrial, civilian candle products Raw materials and additives, modifiers, etc.
Fully Refined Paraffin Wax,Paraffin Wax Fully Refined,Fully Refined Paraffin Wax 58 60,Sinopec Paraffin Wax Fully Refined,Kunlun Fully Refined Paraffin Wax Henan Shunbang Chemical Industry CO.,Ltd , https://www.sbpolymer.com
Specifications
Injection molding machineÂ
1.Big tie bar space and shot weight capacityÂ
2.Most famous component partsÂ
3.Perfect after-service
FEATURES
- A variety of text can be switched.
- Manual, semi-automatic and fully automatic mode.
- Automatic movement monitoring with alarm and fault diagnosis.
- Function of slope setting can set the start and stop of movements, so as ensure the smooth movement
Â
CONTROL SYSTEM
All-digital control system uses dedicated controller, multiple CPU processing division,
a multi-functional automatic fault detection, alarm system, certificates 99 mold of
processing procedures, with remote control interface. System is of high stability and
responsiveness. System uses color LCD, man made interface for easy operation and
with a number of peripheral interfaces.
Â
HYDRAULIC SYSTEM
Advanced hydraulic system design, through proportional control of pressure, flow achieves rapid multi-level pressure, speed switching, the system configuration is reasonable, stable and reliable. The noise is less than 75 dB. The medium and large machine adopts a two-way cartridge inserted valve system to improve the system of flow and speed of response, and makes the whole machine reach the best performance.
SERVO SYSTEM
After receiving the pressure and flow instruction from computer controller, the servo driver will compare it with the actual pressure and flow feedback, and rectify the difference by controlling the rotating speed of the servo motor. In this way, the control of injection molding is not only acurate but also fast, and the repeatabillity of the products high as well.
Technical parameters
MODELÂ
BST-1400A
INJECTIONÂ UNITÂ
Â
A
B
Screw diameterÂ
mm
36
40
Shot size(theoretical)Â
Cm³
256
280
Shot weightÂ
g
230
252
Injection pressureÂ
Mpa
176
160
Injection rateÂ
g/s
95
100
Screw L/D ratioÂ
L/D
23.4
22.2
Screw speedÂ
r.p.m
0-190
Nozzle DiameterÂ
Srmm
10
CLAMPINGÂ
Â
Â
Clamp tonnageÂ
KN
1400
Toggle strokeÂ
mm
365
Mould ThicknessÂ
mm
150-420
Space between tie-barsÂ
mm
428X386
Ejector strokeÂ
mm
140
Ejector tonnageÂ
KN
50
Ejector numberÂ
Piece
5
Hole DiameterÂ
mm
100
OTHERSÂ
Â
Â
Heat powerÂ
KW
8.2
Max. pump pressureÂ
MPa
16
Pump motor powerÂ
KW
13
Valve SizeÂ
mm
10
Machine dimensionÂ
m
4.8X1.6X1.7
Machine weightÂ
t
4.2
Oil tank capacityÂ
L
220
Our Service
Supply mode: the supplier factory delivery, simple packaging, the supplier agent consignments, the expense is payed by the buyer .
Â
Terms of payment: the buyer pay 30% of the total payment as the signing of the deposit, the contract comes into effect, pay the balance before shipment .
Â
Quality assurance: the equipment according to the enterprise standard implementation and mechanical guarantee period is one year, the main electrical appliances for half a year .
Â
Method of acceptance: equipment processing after the completion of delivery, the buyer sent to the factory acceptance, for commissioning, the buyer to provide raw materials for plastic material .
Â
Technical and after-sales service:
The supplier the following technical and after-sales service commitment
A) provide on-site installation guide;
B) responsible for the commissioning of equipment;
C) responsible for the buyer's personnel mount guard before the operation and maintenance training;
D) one year free warranty (due to the buyer's improper operation caused by damage charge costs), and ensure the supply of spare parts for a long time, only receive the cost.
E) provide technical advisory services for a long time
Â
Delivery date: the contract is signed and completed within 45 working days after receiving the deposit unit processing and manufacturing, with the conditions of the factory acceptance
Model NO.: BST-1400A
Computerized: Computerized
Certification: CE, ISO9001:2008
Name: Small Plastic Bucket Molding Machine Price
Screw Diameter: 36-40mm
Shot Size: 256-280cm³
Shot Weight: 230-252g
Injection Pressure: 176-160MPa
Injection Rate: 95-100g/S
Screw L/D Ratio: 23.4-22.2L/D
Screw Speed: 0-190r.p.m
Nozzle Diameter: 10
Clamp Tonnage: 1400kn
Trademark: BEST MACHINE
Transport Package: Wooden Package or by Order
Specification: CE
Origin: China
HS Code: 8477101010