There are many people who have this idea that it is very difficult to install wireless monitoring. In fact, the wireless monitoring system has only three parts: surveillance cameras, wireless transmission equipment, and monitors.

First, connect the surveillance camera to the wireless transmission equipment. Most of the wireless transmission equipment used here is the wireless bridge ST58T8G-TX. If you are using a webcam, connect it directly with a network cable.

Then, the video signal is transmitted back to the receiving end of the monitoring room through the wireless bridge ST58T8G-TX. The wireless bridge of Tengyuan Jituo will be debugged before leaving the factory. Therefore, the user directly fixes the bridge with the shelf and aligns the direction. .

Then connect the receiver wireless bridge ST58T8G-RX directly to the computer with a network cable. The computer can watch the surveillance video by logging into the client.

If you need to store video data, you can also add a network DVR. Then you need to add another switch. The wireless bridge ST58T8G-RX at the receiving end connects the network cable to the switch, and then separates the two networks from the switch. Lead to computers and network hard disk recorders.

Electromagnetic Wave Absorbing Patch

Patch Type Absorbing Material,Patch Absorbing Material,Absorbing Material Patch

Zhejiang Yuanbang Material Technology Co., LTD , https://www.yoboemiemc.com