In the daily use of five tons with the crane will inevitably encounter such a failure problem, with the increase in the length of use this is normal. The five-ton crane uses a high-performance engine. The vehicle has an extra load of five tons. It can handle the lifting and transportation of goods up to 8 tons in size. The car's standard strong grip tires help to prevent slippage during rainy days. . We know that the reversing speed reducer is one of the more widely used accessories for on-board cranes. It is a full-cycle reversing deceleration transmission system that integrates a driving power source. It can reverse the support as a transmission follower, and it supports the reversing support. One of the inner and outer rings is affixed with a drive element, a drive source, and a cover, while the other ring is used as a drive follower and as a docking base for the driven work components. This type of structure makes it a combination of reversal, deceleration and drive functions in one, the structure is simple and clear, and maintenance is also very convenient is a general-purpose deceleration drive system. The engine overheating is a common fault when using five tons of cranes . It will cause the engine power to drop, and even seriously damage its parts. So what are the ways to eliminate the engine overheating? Let's take a look. One, found that the temperature is too high or the temperature indicator keeps flashing , to check the car to see if the tank cooling water is normal , there is no leakage in the water tank, water pipes and joints. If no abnormality is found after the appearance , you can make up the cooling water according to the rules and continue to travel. If the temperature is still found to be too high after traveling a certain distance , parking observations have also found that the cooling water is cut much , which is mostly due to the water jacket of the cylinder block being lost by blisters or perforations. After finding this fault, it should be repaired in a timely manner without delay. Second, when there is excess air in the cooling system, air resistance will be formed, so that the cooling water will not be circulated and the engine temperature will be too high. At this time, it is necessary to gently unscrew the tank cover until the gas is at a high engine speed. Release it repeatedly. Third, the engine temperature is too high , you can use the hand to touch the temperature of the water pipe and underwater pipe to determine the problem, if the temperature difference between the two pipes is very large , you can determine that the thermostat does not work properly, you can replace the demolition. Fourth, when the five-ton truck is traveling for a long time on roads with poor road quality or muddy roads, there will be dust or mud radiators. Accumulation of more will affect the cooling effect, resulting in excessive water temperature.
The main function of the edge banding is to seal the cross-section of the board, so as to avoid the damage of the board and the adverse factors (mainly moisture) in the process of use and prevent the formaldehyde inside the board from volatilizing, and at the same time achieve the effect of beautiful decoration.
The product has the following main features: smooth surface, no blistering, no ribbing, moderate gloss, smooth surface and back surface, uniform thickness, uniform width, reasonable hardness, high elasticity, good quality, strong wear resistance, trimmed and sealed The color of the side and the side is close to the surface color, not whitish, good gloss, and the overall color of the finished furniture is coordinated.
Judge good or bad PVC Edge Banding For Cabinet,Pvc Edge Banding,Banding For Cabinet,T Shape Pvc Edge Banding For Kitchen Cabinet Henan Shunbang Chemical Industry CO.,Ltd , https://www.sblubricant.com
1. Look at the hue and surface roughness of the edge banding strip. The color of the surface of a good edge banding strip is also very important. Whether the color is close to the customized product and is gorgeous. If the surface is very rough and there are pull marks, the quality is definitely not much better. This is the surface quality of the edge banding strip. It has nothing to do with the quality of the inner material of the edge banding, mainly the production process of the edge banding factory and the production technical skills of the employees. A good edge banding strip is: the surface must be smooth, no blistering or seldom bubbling, no drawing or few drawing, moderate gloss, not too shiny or too matte (unless there are special requirements).
2. Check the flatness of the surface and bottom of the edge banding and whether the thickness is uniform, otherwise it will cause the joint between the edge band and the board, the glue line is too eye-catching or the gap between the board and the edge band is too large, which will affect the overall beauty. Details determine success or failure, and often a small detail problem may bring an embarrassing situation where the overall effect is not good.
3. Whether the edge trimming is whitish, whether the surface of the bent edge strip is severely whitish, and whether the ground color of the trimming strip is close to the surface color of the board in question. PVC Edge Banding strips are mainly made of PVC and Calcium Carbonate plus additives. If the calcium carbonate content is too high, whitening of the edge banding and bending will occur, which proves that the quality of such products is not good.
4. Whether the strength is okay and whether there is elasticity. High strength means good wear resistance, and the corresponding quality is better. Too high strength also means increased processing difficulty. Low elasticity means low wear resistance and low aging resistance. In addition, according to actual production needs, manual trimming is generally required, and soft spots can be made appropriately, and the automatic edge banding machine can make hard points appropriately.
5. Whether the adhesive is applied evenly and whether it is easy to fall off during use.
6. Smell whether the PVC edge banding strips taste or not. Products produced with good quality raw materials generally have a small taste. If the taste is too large, it means that the quality of the raw materials used in production is relatively poor.