Swing Bearing for excavator
or slewing ring for excavator is a rotational rolling-element bearing or plain bearing that
typically supports a heavy but slow-turning or slow-oscillating load, often a
horizontal platform such as a conventional crane, a swing yarder, or the
wind-facing platform of a horizontal-axis windmill.
Types:
1,Single Row Four Point Contact Ball Swing
Bearing
2,Single Row Crossed Roller Swing Bearing
3,Double Row Ball Swing Bearing
4,Three Row Roller Swing Bearing
5,Single Row Crossed Rollers Swing Bearing
6,Single Row Four Point Contact Ball Swing Bearing
7,Single Row Crossed Roller Swing Bearing
8,Light type profile Swing Bearing
9,Light type profile Swing Bearing
Swing Bearing transport, maintenance
Swing Bearing installation:
3,In order to prevent the rotary bearing partial overload, ensure flexible operation, installation of supporting the shelf should be conducted after all the welding process to eliminate the stress treatment, and the installation plane for machining, the flatness (including an angle of deviation) should be controlled within a certain range.
Excavator Swing Bearing, Excavator Swing Bearing Circle Gear, Swing Bearing JINING UNION MACHINERY AND PARTS CO., LTD. , http://www.vmpmachineryparts.com
Oil cooler for hydraulic circuit of engineering machinery, suca as Excavator, vibratile roller, carlifter and drill rig.
Structure: Plate-bar design
Material: Aluminum
Surface treatment: Painting or powder
Packing: Carton box and wooden pallet
Gin Stone product range covers:
Compressed air coolers and combined coolers
Oil coolers for hydraulic aggregates for car engines and gears
Air coolers and water coolers
Heat exchangers
Complete fan units for E-engines and hydraulic motors
Complete cooling-systems
Gin Stone have a special engineer team which can design special heat exchangers and radiators 100% customized upon request, if you have interest, please contact with us: Www. Gscooler. COM
Manufacture process:
1, Swing Bearing must be very careful handling
2, Transportation and storage to the level of placement is appropriate, must be placed in dry storage room.
3, Lifting screw rings is preferred, a standard way, it and do not impact, in particular the collision radial direction
4, Rotary bearing surface topcoat with rust inhibitor, the anti-rust normally for 6 months, for more than 6 months of storage (such as for accessories) should be re-packaged anti-rust or take other storage measures.
1, the requirements of mounting brackets
2,Installation and support the general use of tubular structures, aligned with the center wall and the track is better.
