The purpose of the car The demolition truck is mainly composed of two types of automobile chassis, water tanks, spray systems, hydraulic system electronic control systems and other components. The dust removal vehicle consists of a swing arm spray device, a liquid storage tank, a self-propelled vehicle, and a control system. In winter, the tanks, spray nozzles, and pump bodies used in the northern areas need to be equipped with an insulation heating system in order to operate normally. There are three sets of switches in the cab, which are the power take-off switch, the water pump switch, and the hydraulic pump switch. Operating sequence: The three switches on the side are: 1 PTO switch 2 Pump switch 3 Hydraulic pump switch AMERICA DIVISION OF TOP SHINE CO.,LTD. , https://www.ningbotopshine.com
The dedusting vehicle belongs to a kind of spray dust suppression and curing agent device at the coal shipping point and mainly serves iron, roads and other fields. When the train transports coal, the demolition truck can cure the coal on each train, form a protective film, and reduce pollution. In addition to dust prevention vehicles used for coal transportation coal dust pollution prevention, but also widely used in other bulk materials transportation process against dust pollution and slag yards, coal storage yards, construction sites, automobile coal fly dust, sand fixation, steel building materials, cement, enterprises All kinds of open-air stockyards, such as ecological slope protection.
The demolition truck mainly utilizes the interaction between the hydraulic system and the electronic control system. That is, the mobile spray equipment injects the spray fluid into the liquid storage tank at the dispensing station and goes to the spraying point; when the train passes, the control personnel controls the rotation of the transmission hydraulic system. The liquid pipe is orthogonal to the carriage and the liquid pump starts to spray at the same time. And adjust the liquid pump flow to meet the design spray standard. Through the remote control between the train hooks, the stepping motor or the servo motor is controlled to stop spraying and spraying by rotating the shielding drum through the transmission connection device. When the train passes completely, the device stops spraying.
Operation sequence:
a, start the engine, step on the clutch to pull out the power switch, the power take-off begins work;
b, the pump is turned on: first perform a action, and then step on the clutch to pull out the pump switch, if a action has been started, you can directly step on the clutch to pull out the pump switch, so that the pump starts to work; c, the hydraulic pump is turned on, first perform a action , and then step on the clutch to pull out the hydraulic pump switch, if a action has been started, you can directly step on the clutch to pull out the hydraulic pump switch, the hydraulic pump starts working, pay attention to the hydraulic pump and pump can not work at the same time, start the pump must turn off the hydraulic pump ,vice versa.
Dust removal car - Second, structure and principle
Dust removal car - three, dust removal car components: