Material Selection:
1. Frame: 2MM thicknesses cold-roll Stainless steel.
2. Motor: Germany SEW brake motor (outer), power 0.75KW, power supply 220V.
3. Control system: Imported Japan Mitsubishi converter and PLC to control of electric box (150%1HZ)
4. Opening & closing speed: 0.6-1.5m/s (adjustable).
5. Safety Device: Korea Photocell Sensor, emergency stopping reaction when sensing obstacles.
6. Curtain: France high-density polyester fiber and the surface coating processing, thickness 0.8MM, variety colors can be chose: Red, yellow, blue, green, orange, gray, white, transparent, etc. Tensile strength: 4000/3500N/5cm, tear strength 600/600N. Fire-proofing level: German standard DIN75200 Usage temperature: -30 ° C +70 ° C.
7. Wind resistant: The Aluminium alloy Reinforce Girder to increase wind resistant effect.
8. Curtain replacement function: Aluminium alloy Reinforce Girder is loaded between 2 pieces Curtain, can be replaced easily if any curtain broken, save your cost.
9. Transparent window: 1.2MM thickness transparent PVC window, size and location is up to your request, more safer.
10. Seal: Seal brush are Installed inside the guides, and the special bottom design, to fit any uneven ground.
11. Cotrolling way: Push button + radar sensor, very convenient.
12. Limiting Switch: Mechanical limiting switch, easily and exactly.
13. Emergency STOP: With emergency stop button on control panel, can stop easily by
Hand once disconnect or accident
14 Fault recovery function: All Hongfa's production is with fault recovery function, system will self-recovery after power cut off.
15. Delivery time: About 7 business days with contract and deposit confirmed.
16. Pyament item: 50% before production, and the other 50% before shipment.
17. Warranty Details: We provide 12 months warranty for all doors and accessories (except man-made disasters, Irresistible natural disasters, ect^).
We have many professional engineers with rich experience, qualified products, perfect service system, and good cooperation relationship with many famous companies.
High Speed Stacking Door, High Speed Stack Door, PVC high speed stacking door, Rapid stacking door, Fast stacking door SHENZHEN HONGFA AUTOMATIC DOOR CO., LTD , https://www.hongfafd.com
On April 20th, JAC Commercial Vehicles brought their heavyweight products to the Shanghai Auto Show. Among them, Jianghuai Light Trucks exhibited six key models: the new wide-body bus, narrow-body car, the new wide-body car, the narrow-body car, the overseas version of the narrow-body car, the new coach Bell, and the Jac Bell annual model. The Jianghuai Gehlführer heavy truck has a strong debut of the truck containing the Navistar engine and the LNG new energy heavy truck. What's more worth mentioning is that at the current Shanghai auto show, the Jacquard Heavy Truck and a Naweisi The tractors and a Navistar engineering truck were on the same stage.
New Shuai Ling's overseas launch of the global version
The global launch of the new Bell, which brings together global technology and leads the trend of high-end light trucks, was held on the first day of the Shanghai International Auto Show. Nearly 100 overseas distributors and hundreds of Chinese and foreign media from around the world have witnessed this moment.
The new Bell is a high-end model that focuses on the development of the world's top light trucks and is dedicated to high-performance logistics. The new version of the Right rudder launched this time is developed by JAC Light Trucks to meet the needs of the international market.
At present, the new Bell has formed a wide body, medium body, narrow body, the card in the four major product series, each series of models with different powertrain, comprehensive coverage of 2490-5300mm wheelbase segment, become the most complete high-end domestic product line Light truck brand. The JAC light truck that has been honored as the first brand of China's light truck exports has ranked first in China's light truck exports for the 12th consecutive year. Among them, Shuai Ling has accumulated sales of over 150,000 units.
The new Bell uses a new cab, new engine, and new chassis to innovate to achieve even better performance. The new handsome bell cab is a model of domestic light truck safety and comfort. It is the first light truck product to pass the vehicle safety test in China. It uses leading active and passive safety design and configuration. The high-strength steel body frame and the reinforced floor structure are effectively constructed as one body. When impacted, it can form a “safety space†and ensure driving. Personnel safety; advanced buffer device uses energy buffer bumper, effectively absorbing collision energy, to minimize the impact of collision on the human body. Exhaust-assisted braking, ABS anti-lock braking system and other active safety configuration can provide continuous and stable braking force to ensure the safety of vehicle braking. In terms of comfort, Shuai Lingxin will use the clutch vacuum booster for the first time on the domestic light truck, greatly reducing the clutch pedal operation force, and the driver will feel the seductive and comfortable features of the sedan-clutch pedal; in addition, the car-integrated one-piece instrument panel High-end configurations such as imported air-conditioning key accessories, engine and vehicle noise reduction will all bring light-car users a car-like driving experience.
In the key power configuration and fuel consumption performance, Shuailing new products bring new surprises to users. The new talents of this exhibition will be equipped with international first-class powers such as 4DA1, Cummins, Maisfu, JND, etc., and provide efficient solutions for the full power segment of 2.8L-4.8L medium and light trucks. Program.
In the power system, due to the integrated design of the new model for power and transmission systems, the scientific matching of the engine, transmission, and rear axle are scientifically matched, the power transmission is more efficient, and the kinetic energy loss is smaller, making the fuel consumption of the new product perform exceptionally well. The constant fuel consumption of no-loads is only 7-8 liters, and the full-load fuel consumption is less than 10 liters at full speed. It will undoubtedly focus on the industry's greater attention to saving fuel.
Another highlight of this JAC light truck exhibit is the Jianghuai Bell annual model. It is reported that Jianghuai Bell annual model (HFC1061KR1 truck) applies JAC Bell's new driver's cab, and the front teeth of the tiger-toothed model are even more fierce, and the interior is being upgraded with cars to enhance the comfort of the vehicle. Length, height and height are respectively 6950/2110/2260mm, wheelbase is 3815mm, strong power, equipped with Cummins ISF3.8L engine, meet the national IV emission standard, maximum torque up to 450Nm/1200-2200rpm and maximum power of 105kW/2600rpm, the highest At speeds exceeding 100km/h, the Ministry of Communications has a fuel consumption of 13L at 100km. With the advantages of “three highs†of high load bearing, high power and high comfort, and the “three low†advantages of low cost, low fuel consumption, and low noise value, Jianghuai Bell’s new HFC1061KR1 truck can efficiently meet suburban and inter-city conditions. High-speed logistics demand.
Jacques-German hair quality is invincible
The JAGG 8x4 trucks and 4x2LNG tractors exhibited at the Shanghai Auto Show are outstanding representatives of JAC Gehlfa-fabrik to meet the international advanced standards. They have drawn in the quality competition of the "big names" of domestic and foreign heavy trucks. Took the lead, won the recognition of mainstream media and industry experts at home and abroad, and was greeted by professional visitors.
With its world-class hardware and software facilities, JAC Geerfa has ensured that the quality of heavy trucks has reached international leading standards in all aspects of research and development, manufacturing, sales and service. JAC Geerfa has world-leading precision equipment, including Asia's largest 6,000-ton presses, ABB welding robots incorporating cutting-edge technology, and 94 international advanced levels including flexible engine production lines and the Dürr painting line. Automatic production line. All JAC Gehlfa heavy trucks are manufactured on the four production lines of high-efficiency, advanced stamping, high-automated welding, energy-saving and environmental-friendly painting, and flexible assembly. They are manufactured through four major processes: stamping, welding, painting and assembly. JAC Gealfa gains quality recognition with its forward-looking design concept, first-class heavy truck manufacturing equipment and processes, and the world's leading inspection and quality management system.
In addition, for the excellent quality of JAC Gehlfa trucks, matching the Navistar engine undergoing infinite quality experience is the icing on the cake, enabling domestic users to enjoy the world's leading fuel-saving quality and strong driving force without going abroad.
In addition to excellence in quality improvement, JAC Gehra also focuses on how to translate superior quality into operational value. In order to fully meet the latest requirements for operational value when the user purchases the National IV Heavy Duty Truck, the two national IV heavy trucks developed by JACGER incorporate all the leading technologies that are comparable to the imported heavy trucks, from the actual operational needs of the users. Departures will effectively improve the operational capacity of the domestic logistics and transportation industry.
“The outstanding appearance of JAC Gehlfa heavy-duty trucks in terms of safety, energy saving, comfort and bearing really gives us very considerable operational value. This is the most fundamental reason why we continue to favor this brand of heavy trucks.†Special trip to Shanghai Auto Show to visit JAC Mr. Wang, a loyal user at Geer Development Taiwan, said. With its industry-leading security, energy-saving, interior-building and lightweight technology, JAC Gehlfa trucks continue to help users operate safely and efficiently, earning high profits.
In terms of safety, the thickness of the cab body of the JAC Gehlfascia heavy truck reaches 1.5mm, and the thickness of the collision zone reaches 3mm. The ability to withstand strong impacts from the outside world is significantly improved; the three braking systems operate via three independent air routes, giving multiple vehicle operations Security protection. In respect of energy conservation, the Jacquard-matched Navistar engine uses the world's leading "clean engine" emission technology to provide users with a lower fuel consumption and more powerful operating experience. The fuel cost of LNG heavy trucks is even higher than that of diesel. Heavy trucks are significantly reduced.
In terms of comfort, the actual use of an area of ​​4.2 square meters of the cab is equipped with a leather wrapped steering wheel that can be adjusted according to the height of the driver's height, a large size sleeper wrapped in fabric, a six-way adjustable airbag seat, etc. High-grade configuration, and significantly enhance the shock absorption effect through a more rational arrangement. In terms of load-bearing, JAC Gehrafa has reduced the weight of the body by using high-performance, low-leaf spring design, aluminum alloy components, lightweight design of the chassis system, lightweight design of details, and lightweight frame of high-strength steel. Run to reserve a larger load space.
At the Shanghai International Auto Show where strong brands of global heavy trucks compete in quality and technology, Jianghuai Gefa made the industry leader by virtue of its superior quality and leading technological connotation of its two international standard heavy trucks. The original imported heavy truck indicates that in the future, through deepening the firm belief of international users of domestic and international cooperation, it not only wins the Shanghai Auto Show, but also successfully opens a new chapter in the development of domestic high-end heavy trucks with an international perspective.