Butyl Rubber Stopper For Prefilled Syringes Our rubber stoppers are made of chlorobutyl rubber materials which obeys the FDA rules , and our products are widely used in all kinds of domestic and imported medical products according to the different needs of our customers .Recently our 10mm Medical Chlorobutyl Rubber Stoppers are on hot sale. it can be used in high therapeutical infusion products, sensitive powder injection medicine,blood plasma products and so on. Moreover, the products have good sealing and low water-gas transmittance, good compatibility with drugs. It has a low dissolution when our product is tested in lab which due to its pure formula,sulfur-free, zinc-free vulcanization system. It also has good puncture retention and low chip rate. If you are looking for a Butyl Rubber Stopper supplier in china , we believe we are your best choice. Looking forward to your inquiries. Butyl Rubber Stopper For Prefilled Syringes,Stopper For Prefilled Syringes,Rubber Stopper For Injection,Round Butyl Rubber Stopper SUZHOU CRH PHARMACEUTICAL TECHNOLOGY CO.,LTD , https://www.crh-health.com
LCD splicing screen installation and environmental requirements
The LCD splicing screen is spliced ​​as the name suggests. The LCD splicing screen is made up of splicing units using various types of brackets. The following is a common centralized bracket installation mode:
1, the ground should be flat, strong endurance, no deformation;
2, control the computer to be placed in front of the splicing screen, to maintain a proper distance;
3, the light does not face the screen, it is recommended to use the built-in downlight, a large window can be installed curtains blocked;
4, weak and strong cables, cable trays should be separated to avoid signal interference;
5, large screen room requires better humidity and temperature control. Working environment is 0 ° ~ 40 °, relative humidity 10% -90%, there must be air conditioning behind the mosaic wall.
6. The splicing screen wall room should be kept clean and dust-proof;
7, eliminate sprinkler head away from the splicing wall as far as possible, and use spray extinguishing agent;
8, the system power supply is AC 220V ± 5V, the use of protective grounding three-eye socket, the number of sockets and the number of splicing units; power supply voltage to be stable, in principle, the splicing system power must be powered by the corresponding power UPS.