According to the “Decision†issued by the Third Plenary Session, the general direction of protecting the ecological environment with the system was clarified. It is expected that the policy of 2014 will focus more on top-level design, focusing on the rationalization of the institutional mechanisms in the development of the environmental protection industry, and be conducive to the long-term development of the industry. In 2014, in addition to the strong expectations of policies introduced by the Ministry of Environmental Protection, such as soil environmental protection and comprehensive treatment plans, clean water action plans, and rural environmental protection management, we understand that improving the government assessment system and environmental protection law The introduction of chemical and environmental taxes is even more important, and the impact on the environmental protection industry will be even more profound and significant.
The steel tube has a section and its length is much longer than the diameter or circumference of the steel. According to the shape of the section, it is divided into circular, square, rectangular, and special-shaped steel tubes. According to the material, it is divided into carbon structural steel tube, low alloy structural steel tube, alloy steel tube, and composite steel tube. According to the purpose, it can be divided into pipes for conveying pipeline, engineering structure; thermal equipment, petrochemical industry, machinery manufacturing, geological drilling, high-pressure equipment, etc. According to the production process is divided into a seamless steel tube and welded steel tube, a seamless steel tube is divided into hot railing and cold rolling (pull) two kinds, a welded steel tube is divided into a straight welded steel tube and spiral welded steel tube.
Tube mill/pipe mill line from HEBEI SENUF TRADE CO.,LTD adopts mature, reliable, completed, economical and advanced process with advanced equipment to ensure the tube pipe mill to reach a relatively advanced level not only in quality and cost but also consumption so that the products have strong competitive power in quality and price.
The composition of the tube mill for sale is from Decoiler, Cutting head, tail, Strip Steel head-tail butt welding, looping storage, Forming, High-frequency induction welding, Removing external burr, Cooling, Sizing, Cutting, roll table and bench, Checking & Collecting, to Binding and Accessing Warehouse.
Rolling speed of our tube mill/pipe mill machine can be adjusted correspondingly within a suitable range of pipe diameter and wall thickness.
HEBEI SENUF TRADE CO.,LTD is a professional tube mill machine manufacturer and exporter of all kinds of standard and non-standard tube mill/pipe mill line. We can provide: Tube Mill Line.Direct Square Tube Mill Line.High Frequency ERW Pipe Mill for Sale.Big Size Tube Mill Line.Large Diameter Spiral Pipe Mill.Stainless Steel Tube Mill Line.API Pipe Mill For Oil Transportation etc. Welcome both national and international customers to contact us for more information.
Pipe Making Roll Forming Machine,Tube Mill Line,Spiral Tube Mill Line,Pipe Mill Line HEBEI SENUF MANUFACTURE AND TRADE CO., LTD , https://www.senufmetals.com
Environmental monitoring equipment is the commanding height of the environmental protection industry. For environmental monitoring work, monitoring instrumentation plays an important role in it, and assumes the responsibility of providing accurate monitoring data and monitoring reports. Its importance is unquestionable. For example, monitoring of wastewater pollution sources requires COD-based sources of pollution monitoring instruments and automatic control systems; instrumentation of the exhaust gas pollution source monitoring system is mainly composed of industrial dust, smoke, smoke, SO2, NO2, CO, and flue gas flow rate monitoring factors. Monitoring system; surface water quality monitoring requires monitoring of pH, dissolved oxygen, conductivity, turbidity and temperature instruments and so on.
In the air pollution problem, first of all, environmental monitoring instruments and equipment are valued, and their demand is also greatly increased. In particular, the monitoring and release of PM2.5 has been stepped up across the country, so that the environmental protection departments have increased the procurement of environmental monitoring equipment and equipment, which has brought about a pulling force for the industry. In addition, the current gross profit margin of environmental monitoring equipment is high, and the market has broad prospects, which also accelerate the development of the industry.
Through on-line environmental monitoring equipment, timely, accurate and comprehensive real-time monitoring of environmental quality and pollution source status and development trends can be provided, providing a basis for environmental management, environmental planning and pollution prevention and control. According to figures released by the National Bureau of Statistics, the total revenue of the environmental monitoring instrument industry in 2012 reached 14.092 billion yuan, and the compound growth rate since 2004 was as high as 35.64%. The growth rate was significantly higher than other sub-industries in the instrument field. During the 12th Five-Year Plan period, with the country's policy support and capital investment in the environmental monitoring industry, China's environmental monitoring instrument market will continue to maintain rapid growth. According to the 12th five-year plan for environmental protection, the total investment demand during the 12th five-year period of environmental monitoring will reach 100 billion yuan.
Development of Instrumentation Industry Under the background of the global financial crisis, we must not only ignore the problems and deficiencies in the instrumentation industry, but also see the development of good conditions and prospects. Only in this way can we ensure the stable and healthy development of the instrumentation industry in the large environment. It is urgent for instruments and meters to expand into new areas. Breaking through the weakness of scientific research and innovation ability can only be a sustained and strong development of the industry.
Automation control technology, automatic detection technology, safety instrumentation technology, sensor technology, wireless technology, etc. will all become important points for future efforts and breakthroughs. The expansion of these new fields will also bring great opportunities for the instrumentation industry.
At present, the problems in China's instrumentation industry are mainly reflected in low scientific and technological content, poor innovation capability, low product quality and reliability, and low competitiveness in the international market. And these problems ultimately point to the development of science and technology in the field of industry, personnel training, application and market development. These aspects are also the focus of China's efforts to solve the instrumentation industry and promote the future development of the industry.
From the aspect of science and technology development, China needs to increase technical investment and innovation to adapt to the future trend of high automation and intelligence. Therefore, automation control technology, automated detection technology, safety instrumentation technology, sensor technology, wireless technology, etc. will all become important points for future efforts and breakthroughs. Through continuous improvement of technology and product innovation, we will further develop from the low-end to the high-end areas, so as to further compete with foreign companies in the market.