In the current situation of good market conditions, whether it will be constrained by certain factors, this is also a concern for many people in the industry. Experts in the industry said that although aluminum die casting products are sold well in China, it does not mean that they are sold well abroad. It is an indisputable fact that foreign markets have their own special needs and are different from domestic consumption habits. These factors are the bottleneck restricting the development of China's aluminum alloy die-casting mold industry. China's aluminum die-casting mold industry has only broken through these big bottlenecks, and increased R & D efforts to continuously adjust the mode of development in order to occupy a place in the international market.
Liquid or slurry like material is applied as a thin
film to the surface of the heated drum, and raw material will be dried as the
drum turns. The dried solids will then be scrapped off with a scrape.
Working Principle
Features
3. Yutong scraper drum
drying machine is particularly suitable for drying thermosensitive materials.
Technical Specifications
of Scraper Drum Drying Equipment
Specifications
Drum size(mm)
Drying capacity(kg/h)
Effective heating
area (m2)
Steam
consumption(kg/h)
Motor power(kw)
Dimensions(m)
Weight(kg)
TG600
Φ600×800
40-70
1.12
100-175
1.1
1.7×0.8×1.5
850
TG700
Φ700×1000
60-90
1.65
150-225
2.05
2.1×1.0×1.8
1210
TG800
Φ800×1200
90-130
2.26
225-325
3.75
2.5×1.1×2.0
1700
TG1000
Φ1000×1400
130-190
3.30
325-475
4.75
2.7×1.3×2.3
2100
TG1200
Φ1200×1500
160-250
4.24
400-625
4.75
2.8×1.5×2.5
2650
TG1400
Φ1400×1600
210-310
5.28
525-775
6.25
3.2×1.7×2.8
3220
TG1600
Φ1600×1800
270-400
6.79
675-1000
6.25
3.4×1.9×3.2
4350
TG1800
Φ1800×2000
330-500
8.48
825-1250
8.6
3.6×2.1×3.5
5100
TG1800A
Φ1800×2000
420-630
10.60
1050-1575
8.6
4.1×2.1×3.5
6150
Rotary Cylinder Drying Machine,Rotary Dryer Machine,Rotating Dryer Machine,Drum Scraper Dryer Jiangsu Yutong Drying Engineering Co.,Ltd , https://www.ytdryer.com
Die-related experts believe that the main reasons that restrict China's current development of the die-casting mold industry are:
First, there are still many deficiencies in the use of raw materials in domestic die-casting molds;
Second, the backwardness of technology is a very big obstacle to the development of China's die-casting mold industry.
Third, China's die-casting mold industry's supporting system is not perfect.
Liquid or slurry like material is applied as a thin film to the surface of the
heated drum, and the material will be dried as the drum turns. The dried solids
will then be scrapped off with a scrape.
1. Using steam or heat transfer oil results in large heating area, uniform
heating and high thermal efficiency.
2. The heat and mass transfer of wet material film in the same direction helps
achieve higher drying rate.