The Tapered Roller Bearing belongs to the separation type bearing, and the inner and outer rings of the bearing have a conical raceway. This type of bearing is divided into single, double and four row tapered Roller Bearing according to the number of the roller. The single row Tapered Roller bearing can bear the radial load and the single direction axial load. When a bearing is subjected to a radial load, an axial force will be produced, so another bearing that can withstand the axial force of the opposite direction is needed to balance it.
There is a single row tapered roller bearing outer ring, the inner ring and a conical roller by maintaining a basket frame into the inner module. The outer ring can be separated from the inner ring assembly. According to the standard of the ISO tapered roller bearing dimension, any standard type tapered roller bearing outer ring or inner ring assembly should be able to achieve international interchangeability with the same type of outer ring or inner ring assembly. For example, the outer ring of the same type should conform to the ISO492 (GB307) rule besides the external dimension and tolerance. The conical angle of the inner ring assembly and the diameter of the component cone must also comply with the relevant provisions of the interchangeability.
Tapered roller bearings are widely used in automobile, rolling mill, mine, metallurgy, plastic machinery and other industries.
Taper Bearing Tapered Roller Bearing,Durable Taper Bearing Tapered Roller Bearing,Cheap Taper Bearing Tapered Roller Bearing,Single Row Taper Roller Bearing LUOYANG AUTO BEARING CO.,LTD , https://www.ballbearing.nl
The PQ001 NMR Analyzer was launched in 2008. After years of upgrading, PQ001 has many advantages such as small size, high precision, good repeatability, good stability and excellent cost/benefit performance. Based on these advantages, PQ001 has been widely used in the determination of oil & moisture content and Solid Fat Content, in food & agriculture areas.
Measuring the oil content of seeds is important for two reasons: firstly, for non-destructive measurement of single seeds, to select high oil content specimens for propagation; secondly, for bulk measurement of oil content for trading or processing;
Method:
Solvent extraction techniques are often used for the measurement of oil content of seeds.However, they tend to be time consuming,cumbersome, and require the use of skilled personnel. There is also a financial cost involved in the purchase and disposal of the solvent chemicals.
Measurement of the oil content in seeds was one of the first applications for Nuclear Magnetic Resonance (NMR), as far back as the late 1970s. Since then, NMR has been proven to be suitable for a wide variety of seeds.
NMR has a number of advantages over solvent extraction and NIR:
It can be calibrated to cover a concentration range from 0 to 100%.
Easily calibration.
NMR is very stable over the long term, so calibrations will rarely need to be adjusted.
The measurement time is short.
Basic parameters:
1. Magnet type: permanent magnet;
2. Magnetic field intensity: 0.28±0.05T;
3. Probe coil: Ø40mm;
Functions:
1. Determination of oil /moisture content;
We're looking for long term business partner, if you are instested in being adistributor of Niumag NMR/MRI instruments, pls feel free to contact us.NMR device Oil Content analyser Benchtop NMR nuclear magnetic resonance
PRODUCT DESCRIPTION
The PQ001 NMR Analyzer was launched in 2008. After years of upgrading, PQ001 has many advantages such as small size, high precision, good repeatability, good stability and excellent cost/benefit performance. Based on these advantages, PQ001 has been widely used in the determination of oil & moisture content and Solid Fat Content, in food & agriculture areas.
Measuring the oil content of seeds is important for two reasons: firstly, for non-destructive measurement of single seeds, to select high oil content specimens for propagation; secondly, for bulk measurement of oil content for trading or processing;
Method:
Solvent extraction techniques are often used for the measurement of oil content of seeds.However, they tend to be time consuming,cumbersome, and require the use of skilled personnel. There is also a financial cost involved in the purchase and disposal of the solvent chemicals.
Measurement of the oil content in seeds was one of the first applications for Nuclear Magnetic Resonance (NMR), as far back as the late 1970s. Since then, NMR has been proven to be suitable for a wide variety of seeds.
NMR has a number of advantages over solvent extraction and NIR:
It can be calibrated to cover a concentration range from 0 to 100%.
Easily calibration.
NMR is very stable over the long term, so calibrations will rarely need to be adjusted.
The measurement time is short.
Basic parameters:
1. Magnet type: permanent magnet;
2. Magnetic field intensity: 0.28±0.05T;
3. Probe coil: Ø40mm;
Functions:
1. Determination of oil /moisture content;
We're looking for long term business partner, if you are instested in being adistributor of Niumag NMR/MRI instruments, pls feel free to contact us.NMR device Oil Content analyser Benchtop NMR nuclear magnetic resonance
Usually, the conical angle of the outer raceway of the single row tapered roller bearing is between 10 degrees ~19 degrees, and it can simultaneously bear the joint action of axial load and radial load. The larger the cone angle, the greater the ability to bear the axial load. The bearing of the big cone angle, the postposition code plus the B, the cone angle between 25 degrees ~29 degrees, can bear a large axial load. In addition, the single row tapered roller bearing can adjust the size of the clearance during the installation process.
The outer ring (or inner ring) of a double row tapered roller bearing is a whole. The two inner ring (or outer ring) has similar small end faces, and the middle has a spacer. The clearance is adjusted by the thickness of the spacer, and the pre interference of double row tapered roller bearings can also be adjusted by the thickness of the spacer.
The performance of the four row tapered roller bearing is basically the same as that of the double row tapered roller bearing, but the radial load of the double row tapered roller bearing is greater than that of the double row tapered roller bearing, and the limit speed is slightly lower, which is mainly used for heavy machinery.
Multi seal double, four row tapered roller bearings, ZWZ provides long life, multi seal double, four row tapered roller bearings. The new design of the bearing is personalized and the traditional design method of the fully sealed bearing is changed. A new seal structure combined with seal and dust-proof is adopted to improve the sealing effect and improve the sealing performance. Compared with open structure bearings, the life of multi seal double and four row tapered roller bearings increased by 20% to 40%, and the consumption of lubricants was reduced by 80%.
Model NO.: PQ001
Model NO.: PQ001
PRODUCT DESCRIPTION