Wuhan HAE Uv Flatbed Printer adopt Toshiba Printing and UV ink, Wide Format UV Inkjet Printer can print excellent images on various rigid medias, such as glass, acrylic, wood, PVC foam board, KT board, MDF, alunimum, cellphone case, ceramic tiles, and so on. The Printing Size can be 1325, 3020, 1610 and 9060 for choice
Uv Led Printing Machine,Uv Printing Machine,Uv Led Printer,Wide Format Flatbed Printer Wuhan HAE Technology Co., Ltd. , http://www.chinahae.com
The thermal oil heater will produce carbon after a long time use. The thermal oil heater cleaning agent is a safe and efficient cleaning agent specially developed for the problem of coking and carbon deposition of the thermal oil heater during use. It solves the contradiction that the heat-conducting oil heater cleaning affects the production, and the problem that the conventional cleaning technology will generate a large amount of waste water.
1. The system discharges oil: The circulating heat transfer oil discharges the heat transfer oil in the system between 120±°C (if no new oil, please find a clean container for proper storage)
2. Prepare a suitable amount of heat-conducting oil system except coke cleaning agent, clean the oil in the heat-conducting oil furnace system, and disconnect the cleaning system from the oil tank (close the valve), including the disconnection of the high tank and the oil tank. connection.
3. Blow residual oil step: Connect the air compressor at the pressure gauge or other connectable place, raise the pressure of the system to 0.3-0.4MPa, and discharge it instantaneously; repeat this until the residual oil is blown away.
4. Combine heat-conducting oil heater, circulation pump, and other heat exchangers to form a cleaning circuit
5. Decoking cleaning: Add the diluted cleaning agent to the system and fill it to the upper bath level 1/2. In addition to the amount of coke cleaning agent added: 10~20% determine the specific amount according to the scale thickness. Temperature: 90 hours: 12-72 hours, depending on the thickness of the scale can be determined.
6. Rinsing and cleaning: After the cleaning is completed, rinse the residual liquid in the system and rinse it with clean water twice until no foam is removed from the coke cleaning agent and the water is clear. Temperature: 85-°C, Time: 5-8 hours
7. Water blowing step: After the cleaning is completed, connect the air compressor at the pressure gauge or other connectable place. Boost the system to 0.3-0.4 MPa with compressed air and vent at each low point. Repeat until the water is blown. So far.