Model NO.: ZXPD3000
Trademark: GDZX
Origin: China
HS Code: 9031809090
Model NO.: ZXPD3000
Trademark: GDZX
Origin: China
HS Code: 9031809090
Features
  •  Compass display: to display pipe position directly.
  •  Left/right arrow indication: use the left/right arrow to indicate the pipe position when route tracing.
  • Right/wrong indication: real-time test the pipe current direction to indicate tracing result and avoid the nearby lines interference.
  • Real-time depth measure and current measure.
  • History curve display: to display the signal variation directly.
  • Cable Identification: Clamp (optional) identification and sensor identification. Clamp identification can precisely gives accurate result. sensor (optional) identification could be used when the Clamp identification is not applicable.
  • Grounding fault location: Use the A frame (optional) to pinpoint the pipe insulation damaged points against the ground. No need to do zero set and the arrow will point to the fault point direction.
  •  Digitization high accuracy sampling and processing,narrow receiving pass band to rise the anti-interference capability and suppress power interference and harmonic interference from nearby running cable and pipe.
  • Multiple locating frequency: active detection and passive detection.
  • Multiple signal output mode: Direct connection output, Clamp Coupling input, Radiation output.
  • Big capacity Li-on batteries series,support auto power off when low battery or long time no operation
  • Solid case and light weight easy to carry  
    Technical Indicators

    1.1.1 Transmitter:

    •  Output: Direct Connection output, Clamp Coupling Output (optional), Radiation output.
    •  Output Frequency:
    •  640Hz (complex frequency), 1280Hz (complex frequency), 10kHz, 33kHz, 83kHz.
    •  Output power: max. 10W, 10 levels adjustable, auto impedance matching.
    •   Direct connection voltage: max. 150Vpp.
    •   Overload and short circuit protection.
    •  HMI: 128X64 LCD.
    •  Power supply: 4 X built-in 18650 Li-on batteries, standard 7.4V, 6.8Ah

    1.1.2 Receiver:

    •  Input: Internal receiving loop, Clamp (optional), sensor (optional),fault locating A Frame (optional).
    • Receiving frequency:

            - Active frequency: 640Hz,1280Hz,10kHz,33kHz,83kHz

            - Power frequency: 50Hz/60Hz,250Hz/300Hz

            - Radiation frequency passive frequency: center frequency 10kHz, 33kHz, 83kHz  

    •  Pipe detection mode: wide peak method,narrow peak method,valley method
    •  Cable identification mode: Receiving Clamp (optional) intelligent identification and sensor (optional) identification
    •  HMI: 320X240 LCD
    •  Built-in battery: 2 X 18650 Li-on batteries, standard 7.4V,3.4Ah

    1.1.3 Other:

    •   Volume: transmitter 270x220x85mm,receiver 700x270x120mm
    •   Weight: transmitter 2.2kgs, receiver 2.2kgs
    •   Charger: input AC 100~240V,50/60Hz,output DC8.4V,2A
    •   Temperature: -10-40ºC,humidity 5-90%,elevation <4500m

    Automatic underground cable pipe detector location system


      Features
    •  Compass display: to display pipe position directly.
    •  Left/right arrow indication: use the left/right arrow to indicate the pipe position when route tracing.
    • Right/wrong indication: real-time test the pipe current direction to indicate tracing result and avoid the nearby lines interference.
    • Real-time depth measure and current measure.
    • History curve display: to display the signal variation directly.
    • Cable Identification: Clamp (optional) identification and sensor identification. Clamp identification can precisely gives accurate result. sensor (optional) identification could be used when the Clamp identification is not applicable.
    • Grounding fault location: Use the A frame (optional) to pinpoint the pipe insulation damaged points against the ground. No need to do zero set and the arrow will point to the fault point direction.
    •  Digitization high accuracy sampling and processing,narrow receiving pass band to rise the anti-interference capability and suppress power interference and harmonic interference from nearby running cable and pipe.
    • Multiple locating frequency: active detection and passive detection.
    • Multiple signal output mode: Direct connection output, Clamp Coupling input, Radiation output.
    • Big capacity Li-on batteries series,support auto power off when low battery or long time no operation
    • Solid case and light weight easy to carry  
      Technical Indicators

      1.1.1 Transmitter:

      •  Output: Direct Connection output, Clamp Coupling Output (optional), Radiation output.
      •  Output Frequency:
      •  640Hz (complex frequency), 1280Hz (complex frequency), 10kHz, 33kHz, 83kHz.
      •  Output power: max. 10W, 10 levels adjustable, auto impedance matching.
      •   Direct connection voltage: max. 150Vpp.
      •   Overload and short circuit protection.
      •  HMI: 128X64 LCD.
      •  Power supply: 4 X built-in 18650 Li-on batteries, standard 7.4V, 6.8Ah

      1.1.2 Receiver:

      •  Input: Internal receiving loop, Clamp (optional), sensor (optional),fault locating A Frame (optional).
      • Receiving frequency:

              - Active frequency: 640Hz,1280Hz,10kHz,33kHz,83kHz

              - Power frequency: 50Hz/60Hz,250Hz/300Hz

              - Radiation frequency passive frequency: center frequency 10kHz, 33kHz, 83kHz  

      •  Pipe detection mode: wide peak method,narrow peak method,valley method
      •  Cable identification mode: Receiving Clamp (optional) intelligent identification and sensor (optional) identification
      •  HMI: 320X240 LCD
      •  Built-in battery: 2 X 18650 Li-on batteries, standard 7.4V,3.4Ah

      1.1.3 Other:

      •   Volume: transmitter 270x220x85mm,receiver 700x270x120mm
      •   Weight: transmitter 2.2kgs, receiver 2.2kgs
      •   Charger: input AC 100~240V,50/60Hz,output DC8.4V,2A
      •   Temperature: -10-40ºC,humidity 5-90%,elevation <4500m

      Automatic underground cable pipe detector location system


       

      Folding Packing Without Sealing

      One of the most versatile automatic clothing folding packaging equipment, suitable for thin and thick all kinds of clothing, as well as all kinds of pants, and complete automatic folding crotch.A multi-functional intelligent automatic packing machine for T-shirts, POLO, super soft fabric garments, thin jackets, thin sweaters and other garments that have paper wrapping requirements. This machine has automatic paper feeding and automatic wrapping functions, which can meet different customized packaging requirements.



      Clothes Folding Machine Price, Machine To Fold Clothes, Auto Folding Laundry Machine, Auto Folding Clothes Machine

      SHENZHEN LINGCHUANG ZHUOYUE TECHNOLOGY CO., LTD , https://www.szlcautos.com