Pet Plastic Dehumidifying Dryer With Loader Features:
NHD series direct-drive hopper dryers are the most efficient and rapidly economical and applied machine to dry the plastics material, it can dry the wet material for package, transportation of recycle, all the models can choose to add the 24-hour timer, a week timer or microcomputer control(containing P. I. D)temperature automatic controller, 99-hour time, fault indication.

Features:
1. Adopting hot air diffuser device with high performance of diffusing hot are evenly to keep the plastic dry evenly and increase the dry efficiency.
2. Special bend design of hot-blast main avoids the accumulation of dust at the bottom of the tubular electric heating element and also avoids the fire.
3. Inner hopper and all the internal parts are med of stainless steel.
4. The separated design of the pail and the bottom of Hooper is convenient to clear and changing material.
5. Adopt proportional deviation indication thermostat to control the temperature accurately
6. Double overheating protection can avoid the accidents caused by people or machine.
7. All models can choose preheating timer, microcomputer control or double temperature protection hopper.
8.0-99 hour timing automatic starting the machine
9. Intermittent drying way to save power.

Our services:

1. Free repair within 1 year of guarantee on the condition of operate the machine in the right way,
Do not include the daily maintaining, also we will not afford the travel expense out of ZHUJIANG delta.
2. Our factory provide machine testing when customer come to our factory to see this machine.
3. We provide detail machine technical specification, electric diagram, installation book, operating manual, drawings
4. We can provide engineers to customer's factory to help installation and training workers if customer required.
5. We offer OEM

FRQ:
1. Payment Terms:
T/T - 30% deposit before production, 70% balance before delivery, or other terms
2. Delivery Detail:
About 10 workdays after payments.
3. Pacage Terms:
International Standard Wooden Case for Export
Hopper Dryer Specifications
  Electrothermal power Air power voltage Measurement BASE desingn size(K×K×d) weight
MODEL CAPACITY (l×w×h)
  (kg) (kw) (w) (v) (cm) (cm) (kg)
NHD-25 25 3.5 122 380/3Φ 76×50×104 16×16×Φ6.2 34
NHD-50 50 4.5 157 380/3Φ 87×54×121 16×16×Φ7 45
NHD-75 75 6.5 157 380/3Φ 94×60×131 16×16×Φ7 56
NHD-100 100 6.5 246 380/3Φ 101×70×141 18×18×Φ8 68
NHD-150 150 9 350 380/3Φ 110×74×162 20×20×Φ8.8 78
NHD-200 200 12 350 380/3Φ 118×84×176 23×23×Φ11.5 110
NHD-300 300 15 750 380/3Φ 142×100×183 27.5×27.5×Φ12 152
NHD-400 400 15 750 380/3Φ 148×106×202 27.5×27.5×Φ12 170
NHD-600 600 20 1100 380/3Φ 158×116×240 28×28×Φ13.5 280
NHD-800 800 30 2200 380/3Φ 183×128×248 35×35×Φ13.5 460
NHD-1000 1000 40 2200 380/3Φ 202×142×248 50×50×Φ13.5 680
NHD-1500 1500 50 3000 380/3Φ 204×142×319 50×50×Φ13.5 800
 

Carbon Steel Pipe

Carbon steel seamless steel pipe is a kind of long steel with hollow section and no joints around. The steel pipe has a hollow cross-section and is widely used as a pipeline for conveying fluids, such as pipelines for conveying oil, natural gas, gas, water and some solid materials.

Compared with solid steel such as round steel, steel pipe has the same bending and torsional strength and is lighter in weight. It is a kind of economic cross-section steel, widely used in the manufacture of structural parts and mechanical parts, such as oil drill pipe, automobile transmission shaft, bicycle frame and steel scaffolding used in construction.

The manufacture of ring parts with steel pipes can improve the utilization rate of materials, simplify the manufacturing process, save materials and processing time, such as rolling bearing rings, jack sleeves, etc., which have been widely used to manufacture steel pipes.

Steel pipe is an indispensable material for all kinds of conventional weapons, and the barrel and barrel are made of steel pipe. Steel pipes can be divided into round pipes and special-shaped pipes according to the different shapes of the cross-sectional area. Because the circular surface volume is the largest under the condition of equal circumference, more fluid can be transported with circular tubes. In addition, when the annular section is subjected to internal or external radial pressure, the force is more uniform, so the vast majority of steel pipes are round pipes.

The use of steel pipe to manufacture ring parts can improve the utilization rate of materials, simplify the manufacturing process, save materials and processing hours, such as rolling bearing rings, jack sleeves, etc., currently has been widely used to manufacture steel pipes

carbon steel black pipe,seamless carbon steel pipe,low carbon steel pipe,carbon steel welded pipe

Shandong Fengbao Metal Products CO.,LTD. , https://www.fengbaosteels.com