These devices are widely used in industry,
chemical industry and other fields.We are according to the characteristics of
PP material and extension.Before about the electrolytic tank,
acid-base washing tank, mostly made of metal material selection.We now use the PP material production, cost savings,
and replace those non renewable materials.Environmentally friendly and cost saving.
Laboratory Equipment,Pickling Tanks,Plating Tanks,Custom Tanks Shenzhen Xicheng Plastic Co., Ltd. , http://www.china-xicheng.com
Professional quality! This product effectively removes gum, resin, oil, greasy deposits and dirt from carburetors and fuel systems, help improve fuel consumption, improve engine idle and help prevent stalling!
Product description:
Ak-cc5001 carb clean is a fast-acting carburetor and choke cleaner that dissolves carburetor deposits such as sludge, gum and varnish. Designed to maximize carburetor performance, improve fuel system performance and ensure maximum fuel economy.
Features & benefits:
1. Effectively dissolves gum, varnish, dirt and carbon deposits that inhibit
Performance.
2. Fast-acting. Efficient cleaning action.
3. Assures faster starts and smooth idling.
4. Helps restore performance and gas mileage.
5. Extension spray tube included for hard to reach areas.
Shelf life: 24 months
Applications:
Recommended for cleaning automatic chokes, carburetor elements, intake parts and ventilating systems. Suitable for general purpose cleaning of non-painted surfaces.
Areas of use:
Also ideally suited as a solvent, degreaser and cleanerÂ
Directions:
Carburetor and linkage
With ignition off and engine cool, remove air filter and entire exterior surface of carburetor including linkage.
Automatic chokes
With engine off, spray carb & choke cleaner on both ends of choke valve and corresponding
Manifold heat control valve
With engine cold, spray carb & choke cleaner on both ends of heat control valve shaft.
Move counterweight up and down until valve moves freely. If necessary, tap gently with a light
Pcv valves
Disconnect crank case side of pcv valve and, with the engine running, spray carb &
Choke cleaner into open end of valve while working the plunger back and forth.
Important
* if spilled or sprayed on painted surface, wipe off or wash off immediately.
Storage:
Beware: Aerosol is pressurized. Keep away from direct sun exposure and temperatures over 50 ° C. Do not open by force or throw into fire even after use. Do not spray on flames or red-hot objects. Keep containers tightly closed in a dry, cool and well-ventilated place. Please observe the storage instructions for aerosols!
Carburetor & choke cleaner
Professional quality! This product effectively removes gum, resin, oil, greasy deposits and dirt from carburetors and fuel systems, help improve fuel consumption, improve engine idle and help prevent stalling!
Product description:
Ak-cc5001 carb clean is a fast-acting carburetor and choke cleaner that dissolves carburetor deposits such as sludge, gum and varnish. Designed to maximize carburetor performance, improve fuel system performance and ensure maximum fuel economy.
Features & benefits:
1. Effectively dissolves gum, varnish, dirt and carbon deposits that inhibit
Performance.
2. Fast-acting. Efficient cleaning action.
3. Assures faster starts and smooth idling.
4. Helps restore performance and gas mileage.
5. Extension spray tube included for hard to reach areas.
Shelf life: 24 months
Applications:
Recommended for cleaning automatic chokes, carburetor elements, intake parts and ventilating systems. Suitable for general purpose cleaning of non-painted surfaces.
Areas of use:
Also ideally suited as a solvent, degreaser and cleanerÂ
Directions:
Carburetor and linkage
With ignition off and engine cool, remove air filter and entire exterior surface of carburetor including linkage.
Automatic chokes
With engine off, spray carb & choke cleaner on both ends of choke valve and corresponding
Manifold heat control valve
With engine cold, spray carb & choke cleaner on both ends of heat control valve shaft.
Move counterweight up and down until valve moves freely. If necessary, tap gently with a light
Pcv valves
Disconnect crank case side of pcv valve and, with the engine running, spray carb &
Choke cleaner into open end of valve while working the plunger back and forth.
Important
* if spilled or sprayed on painted surface, wipe off or wash off immediately.
Storage:
Beware: Aerosol is pressurized. Keep away from direct sun exposure and temperatures over 50 ° C. Do not open by force or throw into fire even after use. Do not spray on flames or red-hot objects. Keep containers tightly closed in a dry, cool and well-ventilated place. Please observe the storage instructions for aerosols!
Model NO.: AK-CC5001
Model NO.: AK-CC5001
Carburetor & choke cleaner