Angle Cutting Saw is used for HDPE, PVC, PP,PVDF pipes and fittings cutting, The Bandsaw Machines for Workshop are important cutting equipment for hdpe fitting fabrication preparation. In order to make hdpe elbow, tee,cross and wye fittings fabrication in workshop, this band saw must be multi-angle cutting with cutting angle 0-67.5° . It should have high angle precision for band saw machines to make accurate angle fitting fabrication. Wuxi Yuda has the ideal Angle Cutting equipment from 40-2600mm to match hdpe fittings fabrication machine. A table saw excels in cutting through bigger plastic pipes or thick plastic blocks. The best saw for cutting plastic pipe in angle can choose from DQJ series Multi-angle pipeline cutting machine. for example, DQJ315 Multi-angle HDPE Pipe Cutting Machine, DQJ630 & DQJ800 Plastic Pipe Band Saws, DQJ1200, DQJ1600 Band Saw Machines and DQJ2600 Poly Pipe Angle Cutting Saw. If for automatic cutting mode, you can choose DQJ-A series Automatic Plastic Cutting Equipment. Angle Cutting Saw,Band Saw Cutting,Bandsaw Machine,Plastic Pipe Cutter WUXI MEIERTE MACHINERY TECHNOLOGY CO.,LTD , https://www.wxpipefusionweldings.com
1. ApplicationÂ
 It applies to delivering non-corrosive lubricating -oil ior equivalent liquid without solid particles and fibres at temperature below 300ºC and with the viscosity of  5~ 1500 cst.
 Reducing the speed, the pump can delivery the liquid that the viscosity can be up to 5*10000 cst.
2.Application Scope
 It can give performanceas transfer pump or booster pump in oil delivery system. It can be also applied as fuel pump for delivery system, pressurization and injection in fuel supply system and in all industry fields as lubrication pump.
 KCB series gear pumps are mainly composed of gears, axles, pump body, pump cover, safety valve and axle-end seals etc. The heattreated gears have the advantage of higher hardness and intensity, and rotate with the axles inside the replaceable bearing sleeves. All of pump's parts can be lubricated by delivered medium when working.
 The pump is properly designed with leakage and return chute, which lets the gears bear the least torque force and reduces load and wear on bearings in order to raise pump's efficiency.
 It is alsp disigned with safety valve for protection against overload.The full return flow pressure of the safety valve is 1.5 times higher than the rated exhaust pressure of the pump. It can be also adjusted within the allowance of exhaust pressure range according to circumstances. But  please note the safety valve can not be applied as pressurereducing valve for long time.Â
Â
modelÂ
m3/h
L/min
speed  r/min
exhaust pressure p MPa
NPSHR Â m
efficiency  %
powr
model
KCB-18.3 2CY-1.1/1.45
1.1
18.3
1400
1.45
5
59
1.5
Y90L-4
KCB-33.3 Â 2CY-2/1.45
2
33.3
1420
1.45
5
59
2.2
Y100L1-4
KCB-55 Â
2CY-3.3/0.333.3Â
55
1400
0.33
7
41
1.5
Y90L-4
KCB-83.3 Â 2CY-5/0.33
5
83.3
1420
0.33
7
43
2.2
Y100L1-4
KCB-135 2CY-8/0.33
8
135
940
0.33
5
46
2.2
Y112M-6
KCB-200 Â 2CY-12/0.33
12
200
1440
0.33
5
46
4
Y112M-4
KCB-300 Â 2CY-18/0.36
18
300
960
0.36
5
42
5.5
Y132M2-6
KCB-483.3 2CY-29/0.36
 29
483.3
1440
0.36
5.5
42
11
Y160M-4
Â