It is suitable for different kinds of plastic products produce. High quality and reasonable machine. Tungsten Carbide Roll Rings, also known as hard alloy roller ring, has been widely used in the rolling production of high-speed wire, bar, threaded steel, seamless steel pipes, etc. due to its good wear resistance, high-temperature hardness, heat fatigue resistance, thermal conductivity, and high strength. Tungsten Carbide Sleeve,Tungsten Carbide Roller, Steel Rebar Rolling,Steel Wire Rod Rolling,WC Roller Luoyang Golden Egret Geotools Co., Ltd , https://www.lyshieldcutters.com
We are professional plastic injection molding machine manufacturer for all kinds of plastic products, Clamping force from 50 to 1800Ton, injection weight from 50 to 10000g. Also we have CE and ISO certification.
If u are interested, please contact me:Â Â Â
Â
SPECIFICATION
XY1400-1
INJECTION UNIT
A
B
C
SCREW DIAMETERÂ
mm
38
42
45
SCREW L/D RATIOÂ
L/D
   22.1
20
18.6
SHOT VOLUME(THEORETICAL)Â
cm3
   193
235
270
INJECTION WEIGHT(PS)Â
g
    176
216
246
INJECTION RATEÂ
g/s
94
115
132
INJECTION PRESSUREÂ
MPa
 205
170
147
SCREW SPEEDÂ
rpm
190
CLAMPING UNIT
Â
CLAMP FORCEÂ
KN
1400
OPEN STROKEÂ
mm
380
SPACE BETWEEN TIE BARS(W*H)Â
mm
420x420
MAX.MOULD HEIGHTÂ
mm
470
MIN.MOULD HEIGHTÂ
mm
145
EJECTOR STROKEÂ
mm
120
EJECTOR FORCEÂ
KN
38
OTHER
Â
MAX.PUMP PRESSUREÂ
MPa
16
PUMP MOTOR POWERÂ
kW
13
HEATING POWER
kW
7.8
MACHINE DIMENSION(L*W*H)Â
m
4.8x1.33x1.9
OILTANK CUBAGE
L
250
MACHINE WEIGHTÂ
t
4
Â
The Tungsten Carbide Roll Rings we produce mostly come in two series: WC Co and WC Co Ni Cr, with Co and Co Ni Cr as binders ranging from 6wt% to 30wt%. From a usage perspective, hard alloy rollers have good comprehensive mechanical properties, with a bending strength of over 2200 MPa and an impact toughness of (4-6) × At 10 ^ 6J/m ^ 2, the Rockwell hardness (HRA) can reach 78~90. During the high-speed wire rolling process, the single groove steel passing amount is much higher than that of cold hard cast iron or high-speed steel rollers.