• Model NO.: GF-SZ
  • Power Source: AC220V
  • Grinding Wheel Linear Velocity: 12m/S
  • Specification: 500 * 400 * 310 mm
  • Weight: 0-100Kg
  • Work Round Trip: 20mm
  • Transport Package: Seaworthy Package
  • Origin: China
Product description

Double end grinding machine for rubber factory and scientific research units abrading rubber specimens to a certain thickness for other test equipment to test. Is one of indispensable equipment in the test of rubber quality work.


This machine is mainly composed of base feed apron, grinding wheel, wheel, vacuuming pipe, motor and other major parts. The structure is simple, the use of safe, easy to operate.

Technical parameters
1, grinding wheel linear velocity: 12 m/s

2, grinding wheel specifications: G260APRI170 * 40 * 32 to 36

                                                  G260APRI170 * 40 * 32 80 grains

3, motor GO2-11-40.6 W AC380V 50 hz 1400 revolutions per minute

4, work size: 44 mm * 160 mm diameter, the center height of 214 mm

5, work round trip: 20 mm

6, gripped sample size: length is greater than 260 mm

                                     The width of the largest 36 mm

                                       Maximum 8 mm thickness

7, appearance size: 500 * 400 * 310 mm

8, net weight: 80 kg

Method of use

1, touch hands to make the knurling eccentric ball opens, the rubber specimens at one end of the clip, then the other end of the specimen, counterclockwise along the wheel through active roller pressure good work.

2, start the motor and the wheel moving ahead as shown in the direction.

3, shaking the handle, make the dragging plate along the lower rail to feed, dial mounted on the handle, every little is 0.02 mm.

4, upon the handwheel is equipped with safety device, the handwheel only toward counterclockwise rotation, whereas overexert will damage its insurance device.

5, after the work should be coarse grinding, fine grinding.

 

Maintenance 

1, if discover the uneven thickness of the specimen and uneven phenomenon, should check whether grinding wheel plane parallel.

2, in case of disorder of a grinding wheel circle phenomenon, the cutter correcting plane. (diamond)

3, add lubricant to drag board face on a regular basis, to ensure the normal work.

4, often the clearance adjusting nut and screw.

5, the machine installed in the source of no vibration and no corrosion environment.

Our main product
Wire Cable Double Head Griding Machine

Exhibition
Wire Cable Double Head Griding Machine
Delivery and Package
Wire Cable Double Head Griding Machine
Why choose us?
Wire Cable Double Head Griding Machine
 

 
 
 
 
 

9kg Gas Cylinder

Lpg Gas Cylinder,9Kg Lpg Cylinder,Empty Cylinder,9Kg Lpg Gas Cylinder

Low Pressure Gas Cylinder,High Pressure Gas Cylinder,Co., Ltd. , http://www.china-speycylinder.com