Due to the large wind and sand in the spring, there will be a lot of dust on the surface of the aerial vehicles. When the vehicle is scratched, it is easy to scratch the paint, so this season should give more care to the paintwork of the aerial vehicles. Seamless carbon steel pipes are made of steel ingots or solid billets through perforation to make capillaries, which are then hot-rolled, cold-rolled or cold-drawn. The raw material of carbon Steel Pipe is a round tube blank, which is cut by a cutting machine into a billet with a length of about 1 meter, and sent to a furnace for heating through a conveyor belt. The billets are fed into the furnace and heated at about 1200 degrees Celsius. The fuel is hydrogen or acetylene. Furnace temperature control is a critical issue. After the round tube blank is released from the furnace, it is pierced through a pressure punching machine. Generally, the more common punching machine is the conical roller punching machine. This kind of punching machine has high production efficiency, good product quality, large amount of perforation and diameter expansion, and can wear a variety of steel grades. After perforation, the round tube blank is successively cross-rolled, continuously rolled or extruded by three rolls. Carbon Steel Tube, Mild Steel Pipe, Hot Rolled Steel Pipe, Weld Steel Pipe Shandong Guanzhou Iron and Steel Group Co., Ltd. , https://www.guanzhouiron.com
1. Seamless steel pipe for structure (GBT8162-2008). Mainly used for general structure and mechanical structure. Its representative material (brand): carbon steel, 20, 45 steel; alloy steel Q345, 20Cr, 40Cr, 20CrMo, 30-35CrMo, 42CrMo, etc.
2. Seamless steel pipes for conveying fluids (GBT8163-2008). It is mainly used for conveying Fluid Steel Pipe in engineering and large-scale equipment. The representative material (grade) is 20, Q345, etc.
3. Seamless steel pipes for low and medium pressure boilers (GB3087-2008) are used to manufacture various structures of low and medium pressure boiler superheated steam pipes, boiling water pipes and superheated steam pipes, large smoke pipes, small smoke pipes and arch bricks for locomotive boilers Hot-rolled and cold-drawn (rolled) seamless steel pipes of high-quality carbon structural steel for pipes. The representative material is 10, 20 steel.
The aerial filter of a high-altitude aerial vehicle is equivalent to the nose of a person. Its role is to filter out the sand and some suspended particles in the air, so that the engine works normally. The general car's air filter needs to be replaced at 20,000 kilometers and 10,000 kilometers. Check it out, spring is best to check once in 2000 kilometers.