Material Handling Process System Material Handling Process System,Process Equipment For Bulk Material,Process Systems For Material Handling,Process Machines For Material Handling Quantum Conveying Systems Yangzhou Co.,Ltd. , https://www.yzconveying.com
1, the peak impact force should not exceed 6kN;
2. The extension length or fall distance should not be greater than the value of the product identification;
3, should not appear ribbon tear, open wire, broken pieces of metal, open the connector, rope off, analog people slip, buffer (rope) off phenomenon 4, after the crash stopped, the simulation is not suspended in the air There should be a simulation of head-down phenomenon;
5. After the fall and fall, the seat belt should not exhibit obvious asymmetric slip or asymmetrical deformation;
6. After the crash stops, the connecting point of the safety rope with the main belt should be kept on the back or waist of the simulated person when the simulated person is suspended in the air, and should not be slid to the underarm and waist;
7. After the crash stops, the simulated person's armpits and the inside of the thighs should not have metal parts when they are suspended in the air;
8. After the crash has stopped, the simulator should not have any components to oppress the simulated human throat when it is suspended in the air.
9. After the fall is stopped, the slippage of the webbing or rope within the adjustment buckle should not exceed 25mm.
Overall static load:
1. The overall static tension should not be less than 4.5kN. Should not appear webbing tearing, open wire, broken pieces of metal, connector open, rope broken, plastic deformation of metal parts, simulated human slippage and other phenomena;
2. The seat belt should not exhibit obvious asymmetric slip or asymmetric deformation;
3, simulation of the armpits, inner thighs should not have metal parts;
4. There should not be any parts to oppress the simulated human throat,
5. The slippage of the webbing or rope within the adjustment buckle should not exceed 25mm.
This article is the original article of Qingdao Zhongbang Instrument Co., Ltd. If you need to reprint it, be sure to add the source of the description. Reproduce the misappropriation without permission.
Overall dynamic load: