• Model NO.: AF-G1000
  • Certification: CE
  • Customized: Customized
  • Transmission Method: Machinery
  • Machine Color: as Require
  • Machine Weight: 4tons
  • Delivery Time: 30days
  • Cutting Type: Hydraulic
  • Type: Roof and Wall
  • Transport Package: Normal
  • Origin: Shanghai
  • Tile Type: Colored Steel
  • Condition: New
  • Usage: Roof
  • Product Name: Roof Tile Roll Forming Machine
  • Machine Size: 7.5m*1.4m*1.4m
  • Size of Container: 40gp
  • Control System: PLC
  • Driven Type: Chain
  • Trademark: Aofa
  • Specification: SGS
  • HS Code: 84552210
1000mm Effective Width PPGI Glazed Roof Tile Roll Forming Machine

1. Brif introduction
The machine has advantages of faster molding, higher productive capacity, and superior performance of finished product, conveniently operation and reliability.
1. PLC automatic control system, stability and easily for operation. Machine adoption hydropneumatic for pressing, it has higher production capacity.
2. Using cement and sand as the main raw material for production, with higher strength of finished product. The cement tile is perfectly used for house construction.
3. The machine can produce various kinds of tiles through changing mould, such as European tile, Flat tile, Bone tile, Edge tile and etc. And this machine can also produce different kinds of colorful floor tiles.

2. Working flow:
Decoiler----feeding-----roll forming-------cutting-----output table

3. Technical description:
A. Decoiler
Capacity(Max): 5MT
Coil width(Max. ): 1300mm

B. Roll forming system
1. Main motor power: 5.5kw
2. Drive: Chain
3. Main shaft dia: 76mm, material: 45#refined forge steel
4. Roller material: 45# forge steel, quenched treatment, chrome coated 0.05mm
5. Roll station: 14stations
6. Raw material: Color steel and galvanized steel
7. Thickness of raw material: 0.4-0.8mm
8. Width of material: 1250mm
9. Working speed: About 5m/min(Exclude punching time)
10. PLC: YASKAWA, made in Japan. 380V 50Hz(Depend on customer)11. Computer operating panel: Touching screen

C. Hydtraulic Cutting system
1. Hydraulic cutting
2. Hydraulic power: 5.5KW
3. Blade material: Cr12MOV, quenched 58° -62°
4. Working pressure: 20mpa

D. Control system
1. Voltage, Frequency, Phase: 380 V, 50 Hz, 3Phase
2. Automatic length measurement
3. Automatic quantity measurement
4. Computer used to control length & quantity. Machine will automatically cut to length and stop when required quantity is achieved.
5. Length inaccuracy can be amended easily.
6. Control panel: Button-type switch and touch screen
7. Unit of length: Millimeter (switched on the control panel)

Machine Components
Name  Qty.
 Decoiler  1set
 Roll forming device  1set
 Cutting device  1set
 Control system  1set
 Output table  1set
 Oil pump  1set

1000mm Effective Width PPGI Glazed Roof Tile Roll Forming Machine
1000mm Effective Width PPGI Glazed Roof Tile Roll Forming Machine
1000mm Effective Width PPGI Glazed Roof Tile Roll Forming Machine

Contact:

Abby Song
 
MOB: +86-18701854523
 
Websites: http://www.shafjx.com
 
         http://shaofa.en.alibaba.com

Led Diffuser

Aroma DiffuserOil DiffuserAir DiffuserElectric Diffuser

Do you need a basin of water to blow the air conditioner? Is it better to blow the air conditioner with cold water or hot water

1. Do you need a basin of water to turn on the air conditioner

If you don't use a humidifier at home, it's better to put a basin of water indoors when blowing the air conditioner. Because the air conditioner will take away the moisture in the air during the refrigeration process, the air will be relatively dry. People expect that in the air conditioning room, they are prone to symptoms of dry skin, dry eyes, dry throat and sore throat. Placing a basin of water in the air conditioning room can adjust the humidity of the air and improve the drying condition



2. What is the effect of turning on the air conditioner and putting a basin of water



Blowing air conditioner and putting a basin of water indoors can increase humidity, but the effect is limited. Because the general water basin is relatively small, the degree of evaporation and dispersion of water vapor can not be extended to the whole room, but can only improve the humidity of the air around the water basin. Therefore, in order to reduce the impact of air drying on the human body, it is best to put the water basin close to the human body, and it will have no effect if it is put far away



3. Is it better to turn on the air conditioner to drain cold water or hot water

In theory, hot water is better, but in practice, it's better to put cold water. Because hot water can actively evaporate before cooling, the humidification effect is better than cold water in theory. However, a basin of hot water basically cools in less than an hour, but we can't change a basin of hot water every other period of time, so let's put hot water or cold water at will

4. Blowing air conditioner to dry air can also be done



--The most convenient and effective way to dry the air conditioner with humidifier Aroma Diffuser is to place a humidifier indoors. It can be used for a whole day almost only by adding water 1-2 times a day. However, if the humidifier you buy is not big enough, you'd better put the humidifier close to the human body, otherwise the effect will not be very good.



---Wet the ground and blow the air-conditioned air to dry. If the ground is wet, the moisture on the ground will also improve the humidity of the air-conditioned room after slowly evaporating. If you think it's troublesome to drag the ground every few days, you can sprinkle water on the ground, and the effect is the same. But note that the home is wooden floor, so you can't do this to avoid damaging the wooden floor.


Led light diffuser, Oil led diffuser, Led light diffuser, Air diffuser led, Led bulb diffuser

Shenzhen Ewong Technology CO.LTD , https://www.ewong-tech.com