China Drying Network News China Petroleum and Chemical Industry Federation organized an on-site assessment expert group at Shanxi Yangmei Fengxi Fertilizer Industry (Group) Co., Ltd. Linfen Branch, a coal gasification technology with Chinese characteristics - water coal The industrialized installation of the slurry wall cold-wall coal gasification technology conducted an on-site 72-hour assessment. According to the results of on-site assessment, the expert group confirmed that this device is the world's first water-coal-slurry water-wall gasification industrial device and has excellent comprehensive performance. It is a new type of coal gasification technology with internationally advanced level and independent intellectual property rights, and it is hoped that the relevant departments will promote the application. It supports the technology in terms of large-scale development. The technology was jointly developed by Tsinghua University, Beijing Yingde Qingda Technology Co., Ltd. and Yangmei Fengxi Fertilizer Industry. The single furnace processes 600 tons of raw coal and the gasifier operates at 4 MPa. The assessment expert group stated that this assessment adopted Yangquan anthracite coal and Shenmu coal blended coal, basically in accordance with the design coal type; the device continuously and stably operated for 72 hours, the average load rate was 103.4%, and the assessment data reached the index requirements; High, safe and reliable, with good handling performance; adopting patented technology with independent intellectual property rights, the localization rate of gasification system equipment reaches 100%; the ash melting point of coal for gasification can reach 1500°C or more, and the coal has wide adaptability; The diameter of the water-wall gasifier is 1.6 times larger than that of the gasifier with the original refractory brick structure. The water-wall coal-water slurry wall gasification process is simple and energy-saving and environmentally friendly. According to experts, the technological innovation of the device is mainly compared with the existing water and coal slurry gasification technologies at home and abroad. The water wall adopts a vertically suspended membrane-type wall structure, and the hydraulic circulation system adopts an intrinsically safe natural circulation design, through which The circulation operation ensures the safety of the water wall and avoids the complicated thermal expansion treatment. The water cooling structure of the process burner adopts an integral jacket type, which has a large cooling area and a good cooling effect. The burner cooling and the water wall share one set of heat. The water circulation system not only simplifies the cooling water process, but also reduces the thermal stress of the burner. The service life of the burner is more than 140 days. The coal water slurry feed uses a unique ignition technology, and the gasifier starts quickly, from cold driving to It takes only 3 hours to run at full capacity, which saves driving costs. The device was successfully fed on August 22, 2011. By July 31, 2012, the gasifier had operated for 279 days (the longest continuous operation for 140 days). The rest of the time was planned maintenance, and there was no passive parking phenomenon. Stainless Steel Precision Machining
Stainless steel materials have certain strength, corrosion resistance and toughness, so stainless steel parts are very suitable for many industrial occasions. Precision stainless steel machining parts occupy a large proportion in the stainless steel parts and CNC machining industries, and are used in almost all industries such as machinery, aerospace, equipment, construction, daily necessities, and automobiles. At present, in Precision Machining Parts, the most used stainless steels are 316, 304 and 303 and so on. Stainless steel 316 has the best corrosion resistance and the highest material and processing cost. Stainless steel 304 has moderate corrosion resistance and material and processing costs. Stainless steel 303 has lower corrosion resistance than 316 and 304, but the material and processing costs are also the lowest. . Of course, there are many other stainless steel materials, such as 201, 202, 302 and so on.
SCZY has more than 10 years experience in precision CNC machining. Especially in the processing of stainless steel 316, 304 and 303, we have very rich experience. Whether it is milling, turning or composite turning, our normal machining accuracy can reach ±0.01mm. If higher precision is required, we can cooperate with grinding Processing, up to ±0.002mm.
Stainless Steel Machining, CNC Stainless Steel, Stainless Steel Milling, Stainless Steel Turning, Metal Machining, CNC Metal, Metal CNC Shenzhen SCZY Technology Co.,Ltd , https://www.szcasting.com
