Woven Screen Filter Bag,Filter Bag,Bag Filter,Baghouse Filter HEBEI KANGLIDA METALNET CO.,LTD. , https://www.kldmetalnet.com How to configure iterative parameters in PC-DMIS
Operators familiar with CMMs know PC-DMIS software, PC-DMIS software is the world's best three-coordinate measurement software, powerful, easy to learn and efficient. PC-DMIS software has become the benchmark for the CMM market. The three-coordinate measuring instrument produced by Sirui is equipped with PC-DMIS software, combined with the patented technology of precision 60° triangular beam. Compared with rectangular beam, the center of gravity is lower, the mass to rigidity ratio is the best, and the movement is more reliable. PC-DMIS software as a three-coordinate benchmark software, operators should master the relevant knowledge, the following is the knowledge of how to configure the iterative parameters in PC-DMIS shared by SIRI Measurement.
In the PC-DMIS software, it will re-measure all input features at least once in DCC mode; they will be measured in the order specified by the Iterative Coordinate System command in the Edit window; at this point, PC-DMIS will Display the features to be measured in a message box;
Before accepting the movement, the operator must ensure that the probe can move directly to the feature without colliding with the part; the movement point before or after each feature will not be performed;
After measuring all features at least once, the features will continue to be re-measured for the characteristics of the point type and the point at which the target target radius target is missed; in this mode, since the position of the circle never changes, PC-DMIS The number of times the circle is measured will not be more than once.
Sirui measurement professional three-coordinate measuring instrument manufacturer, its production of three-coordinate measuring instrument for the fifth consecutive year in the domestic brand three-coordinate measuring instrument sales.