Hand Pallet Jacks,Manual Pallet Jack,Hand Pallet Truck,Hand Pallet Jack Jiangsu Lundi Forklift Co.,Ltd. , https://www.lundilift.com
INTRODUCTION:
1. Automatic conveying power system, with non-level frequency conversing speed adjustment and auto synchronous board feeding functions.
2. Flux spray system using scanning spray nozzle, Japanese nozzles and rodless pneumatic cylinders and PLC control, accurate and reliable
3. Remote infrared ceramic heating pipes are adopted in the preheating system which ensures good heat preservation effect, high heating up speed and even temperature
4. Special alloy transportation chain claws, non-stick tin, reinforced, and ensures the quality of welding PCB board.
5. Tin stove adopts imported high frequency conversion motor independent control, stable performance.
6. Lead-free solder furnace with independent design, environment protection and safety, easy to clean.
7. Tin heating furnace uses high-speed PID and 2-stept independent outer -heating control, warm-up quickly and eliminates the flaws of stove tin explodes
8. With time controller, can preset switch functions, tin stove machine heating picks up in 90minutes.
9. Reasonable design of environment protection, and automatic washing claw, ensure the claws clean.
10. The design is reasonable and safe with sensitive fault alarm system, to ensure the stable performance the safety of operators.
SPECIFICATION:
Model No.
JAGUAR N250
Number of heating zones
1
Length of heating zones
800mm
Body size
1800(L)*1200(W)*1560(H)
Outside dimension
2600(L)*1200(W)*1560(H)
Weight
700KG
Total/running power
16KW/4KW
Air supply
0.5MPa
Preheating method
IR(standard)
Preheating power
220V 5KW
Control  method
Press key +PLC
Range of temp. control
Room temperature---300ºC
Preheating time
About 10-15mins for setting 150ºC
Solder type
Lead-free /Â Sn-Pb
Solder pot capacity
220KG
Solder pot temperature
300ºC
Solder power
380V 8KW
Solder temp. control method
PID&SSR
Wave crest drive power
500W 220V
Warm-up time of solder
About 120mins for setting 250ºC
PCBÂ Â width
50-250mm
Convey  speed
300-1500mm/min
Convey  direction
L→R (R→L optional)
Convey   angle
4-7 º
Flux pressure
3-5 bar
Flux capacity
6L
Tommy
Â
Mini Wave Soldering machine/SMT Welding Machine
INTRODUCTION:
1. Automatic conveying power system, with non-level frequency conversing speed adjustment and auto synchronous board feeding functions.
2. Flux spray system using scanning spray nozzle, Japanese nozzles and rodless pneumatic cylinders and PLC control, accurate and reliable
3. Remote infrared ceramic heating pipes are adopted in the preheating system which ensures good heat preservation effect, high heating up speed and even temperature
4. Special alloy transportation chain claws, non-stick tin, reinforced, and ensures the quality of welding PCB board.
5. Tin stove adopts imported high frequency conversion motor independent control, stable performance.
6. Lead-free solder furnace with independent design, environment protection and safety, easy to clean.
7. Tin heating furnace uses high-speed PID and 2-stept independent outer -heating control, warm-up quickly and eliminates the flaws of stove tin explodes
8. With time controller, can preset switch functions, tin stove machine heating picks up in 90minutes.
9. Reasonable design of environment protection, and automatic washing claw, ensure the claws clean.
10. The design is reasonable and safe with sensitive fault alarm system, to ensure the stable performance the safety of operators.
SPECIFICATION:
Model No.
JAGUAR N250
Number of heating zones
1
Length of heating zones
800mm
Body size
1800(L)*1200(W)*1560(H)
Outside dimension
2600(L)*1200(W)*1560(H)
Weight
700KG
Total/running power
16KW/4KW
Air supply
0.5MPa
Preheating method
IR(standard)
Preheating power
220V 5KW
Control  method
Press key +PLC
Range of temp. control
Room temperature---300ºC
Preheating time
About 10-15mins for setting 150ºC
Solder type
Lead-free /Â Sn-Pb
Solder pot capacity
220KG
Solder pot temperature
300ºC
Solder power
380V 8KW
Solder temp. control method
PID&SSR
Wave crest drive power
500W 220V
Warm-up time of solder
About 120mins for setting 250ºC
PCBÂ Â width
50-250mm
Convey  speed
300-1500mm/min
Convey  direction
L→R (R→L optional)
Convey   angle
4-7 º
Flux pressure
3-5 bar
Flux capacity
6L
Tommy
Â
Model NO.: Jaguar N250
Number of Heating Zones: 1
Item: Reflow Oven
Trademark: Jaguar
Transport Package: Wooden Case
Specification: CE
Origin: Shenzhen, China
HS Code: 85151900
Model NO.: Jaguar N250
Number of Heating Zones: 1
Item: Reflow Oven
Trademark: Jaguar
Transport Package: Wooden Case
Specification: CE
Origin: Shenzhen, China
HS Code: 85151900
Mini Wave Soldering machine/SMT Welding MachineShenzhen Jaguar Automation Equipment Co.,Ltd.
Add:Building B,Fuda industrial zone,107 national highway,Shajing,Baoan,Shenzhen,China
Tel:+86-755-23316315Â Â Â Fax:+86-755-29497125
Mob :Â +86-13691605420
Â
Â
Web: www.jaguar-ele.net
Shenzhen Jaguar Automation Equipment Co.,Ltd.
Add:Building B,Fuda industrial zone,107 national highway,Shajing,Baoan,Shenzhen,China
Tel:+86-755-23316315Â Â Â Fax:+86-755-29497125
Mob :Â +86-13691605420
Â
Â
Web: www.jaguar-ele.net