1. Overlung and underslung type 2. The leaf spring could be 75mm and 90mm 3. The axle beam could round and square, the size is 5'' and 6'' 4. Axle spacing: 1300m, 1310mm, 1360mm ,1540mm 5. Axle beam size: 5'' and 6'' / 127mm and 150mm 6. One-axle, tandem, tri-axle are optional Nox Sensor 24V for Benz car, auto engine parts, Mercedes Benz accessories 24V nitrogen and Oxygen Sensor is suitable for Mercedes Benz exhaust treatment. Nitrogen and oxygen sensor is one of the key components of SCR post-treatment system. It is used to measure the concentration of nitrogen and oxygen in engine exhaust to meet the needs of closed-loop control of engine aftertreatment system and on-board OBD diagnostic system. It can be applied to gas engine or diesel engine. Its structure includes ceramic probe, cable and processing chip controller, which is connected with ECU through can communication. The effects of nitrogen and oxygen sensor damage are as follows: 1. If the nitrogen and oxygen sensor is damaged, the diesel control system is in an open-loop state, that is, the emission data cannot be accurately fed back, and the engine control unit cannot accurately adjust the emission. At this time, the vehicle's emission must exceed the standard. If it always exceeds the standard, the service life of tail gas emission treatment equipment will be shortened. 2. Because it is a key component for measuring the excessive exhaust of diesel vehicles. If it is damaged or works poorly, it will directly cause multiple fault lights of the engine to turn on. At the same time, there will be relevant fault storage records in the control unit. 3. The damage of nitrogen and oxygen sensor will lead to the disorder of diesel combustion control, resulting in weak acceleration, idle jitter, unable to start and so on,. Once a problem occurs, the nitrogen and oxygen sensor needs to be replaced in time. It is usually installed at the rear end of the catalyst in the exhaust pipe. Nox Sensor 24V For BENZ Car,Benz Accessories 24V nitrogen and Oxygen Sensor,Mercedes Automobile 24V nitrogen and Oxygen Sensor,Benz Engine Parts 24V Nitrogen Oxygen Sensor Ruian OKOOO Electronic Technology Co., LTD , https://www.okoosensor.com
Â
York/YTE type mechanical Suspension ( Both overslung type and underslung type)
MAIN PARTS LIST AND PART NUMBER Front Hanger 900207/WP Rear Hanger 900208/WP Equalizer Hanger 930003 Equalizer - 1300mm 900209/WP Equalizer - 1540mm 900210/WP
 Equalizer Shaft 930015 Equalizer Shaft (Hard Chromed) Optional 930172 Equalizer Washer 930203 Equalizer Bush 930009 Equalizer Bush (Vesconite) Optional 930170 Fixed Torque Arm 901100/380 Adjustable Torque Arm Screw (260mm) 900033/01 Adjustable Torque Arm End R/H 900024R Adjustable Torque Arm End L/H 900024L Fixed Torque Arm - 1300mm 901100/495
 Fixed Torque Arm - 1360mm 901100/525 Fixed Torque Arm - 1540mm 901100/605 Adjustable Torque Arm Screw (350mm) 900033/02 Adjustable Torque Arm Screw (420mm) 900033/03 Torque Arm Pin 930017 Torque Arm Washer 901010 Torque Arm Bush (Poly) 770701P 10 Leaf Spring 770710 M24 x 2.0 U-Bolt 503281 773011 M24 x 2.0 Nut 503288 M24 Washer 503289 Spring Seat 900046 900211 Bottom Clamp Plate, Underslung 770778/02 Lip Seal 5mm 930071/01 M8 x 1.0 Equalizer Shaft Grease Nipple 930048 M8 x 1.0 Equalizer Shaft Plug 930048/01 
Â
Trademark: UT
Transport Package: Pallets
Origin: China
HS Code: 8708809
We have five types of suspension: