Stuck Up Pin (Adhesive Insulation Fasteners)
• Gasket Adhesive using Rubber Based Adhesive
Golmacool is a professional Stuck Up Pins,HVAC DUCT Accessories,self
adhesive stuck up pins,Self Adhesive Insulation Fasteners manufacturer.
We offered that you can trust. Welcome to do business with us.
Stuckup Pins,HVAC DUCT Accessories,self adhesive stuck up pins,Self Adhesive Insulation Fasteners Ningbo Gemu Ventilation Technology Compnay Limited , https://www.golmacool.com
AEROPAK Carburetor Cleaner ID-301
AEROPAK Carburetor Cleaner can effectively remove greasy dirt, gum, and carbon deposits On PVC valve, ERG valve, choke and other parts, It can easily flush off the residue on Carburetor. The product can increase combustion efficiency to save oil and decrease the Gas pollution.
Package:
Can Size: 65mm X 158mm H
Package: 450ml X 12PCS/CTN
Carton Size: 275X205X205 mm
20ft Container Loading 2500 cartons
Instruction:
1. Automic Chokes: While manually opening and closing choke, spray on both ends of the choke shaft. If not completely free, take choke cover off and start engine. While running, spray into vacuum cylinder.
2. Carburetor Linkage: Flush oily carburetor linkage with spray to remove dust and dirt that interfere with performance.
3. Manifold Heat Controls: Spray exposed ends of heater valve shaft of cold engine. After penetration, move the counter weight up and down until the valve is free.
Warning:
1. Keep away from heat, flame, spark and other source of ignition.
2. Store in a cool, dry place (45° C); Avoid direct sunlight.
3. Do not clash, puncture, or incinerate the can.
4. Keep out of reach of children.
FAQ
Q1. Are you manufacturer?
A: Yes, we Shenzhen i-Like Fine Chemical is a professional manufacturer of aerosol products,  especially in car care products, Aeropak spray paints,  tyre sealer and inflators,  air dusters,  spray adhesives,  etc. Â
Q2. What is your terms of payment?
A: Payment terms vary according to order quantity and agency policy, negotiable upon contact.  We'll show you the photos of the products and packages before loading the goods.
Q3. What is your terms of delivery?
A: EXW, FOB, CFR, CIF, DDU.
Q4. How about your delivery time?
A: Generally, it will take 25 to 30 days after receiving your advance payment.Â
Q5. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.
Q6. What is your sample policy?
A: We can supply 2-3 samples for free,  but as this is aerosol products with pressurized gas,  it is dangerous goods, the courier cost is very high, say about USD 100-200 for 2kg parcels.  And the freight cost need to be prepaid by customers.
Q7: How do you make our business long-term and good relationship?
A:1. We keep good quality and competitive price to ensure our customers benefit ; Only you win first, and then we can win.
A2. We respect every customer as our friends and we sincerely do business and make friends with them,Â
no matter where they come from.
Why to be AEROPAK distributor?
1.AEROPAK is US Style design with US standard quality and net weight.
2.AEROPAK products passed required tests and certificates like RoHS, REACH, etc..
3.AEROPAK is individually barcoded for every item and every color, which is good for stock control and retailing.
4.AEROPAK offers POS & SKU CSV information and English Flyers.
5.AEROPAK offers PDF & Printed Catalogue and Colorcharts.
6.AEROPAK's strong R&D will make more and more new products to expand your market shares.
7.AEROPAK will offer great support for your sales, including your information on our website, cans, catalogue and colorcharts, etc., and will offer many differnt gifts for your promotion, even will also support you for your local trade show.
8.AEROPAK will benefit you a reward of 1-2% of your yearly salesvolumet, according to your yearly order amount.
9.AEROPAK will accept upto 10% OA (Open Acount) according to your yearly order amount.
10.AEROPAK will invite our GOLD DISTRIBUTORS to China for a 7-days traveling.Â
Â
Item No.
APK-8201
Can Size
65mm x 158mm H
Package
400ml x 12PCS/CTN
Carton Size
275x205x205 mm
20ft Container Loading
2500 cartons
AEROPAK Carburetor Cleaner ID-301
AEROPAK Carburetor Cleaner can effectively remove greasy dirt, gum, and carbon deposits On PVC valve, ERG valve, choke and other parts, It can easily flush off the residue on Carburetor. The product can increase combustion efficiency to save oil and decrease the Gas pollution.
Package:
Can Size: 65mm X 158mm H
Package: 450ml X 12PCS/CTN
Carton Size: 275X205X205 mm
20ft Container Loading 2500 cartons
Instruction:
1. Automic Chokes: While manually opening and closing choke, spray on both ends of the choke shaft. If not completely free, take choke cover off and start engine. While running, spray into vacuum cylinder.
2. Carburetor Linkage: Flush oily carburetor linkage with spray to remove dust and dirt that interfere with performance.
3. Manifold Heat Controls: Spray exposed ends of heater valve shaft of cold engine. After penetration, move the counter weight up and down until the valve is free.
Warning:
1. Keep away from heat, flame, spark and other source of ignition.
2. Store in a cool, dry place (45° C); Avoid direct sunlight.
3. Do not clash, puncture, or incinerate the can.
4. Keep out of reach of children.
FAQ
Q1. Are you manufacturer?
A: Yes, we Shenzhen i-Like Fine Chemical is a professional manufacturer of aerosol products,  especially in car care products, Aeropak spray paints,  tyre sealer and inflators,  air dusters,  spray adhesives,  etc. Â
Q2. What is your terms of payment?
A: Payment terms vary according to order quantity and agency policy, negotiable upon contact.  We'll show you the photos of the products and packages before loading the goods.
Q3. What is your terms of delivery?
A: EXW, FOB, CFR, CIF, DDU.
Q4. How about your delivery time?
A: Generally, it will take 25 to 30 days after receiving your advance payment.Â
Q5. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.
Q6. What is your sample policy?
A: We can supply 2-3 samples for free,  but as this is aerosol products with pressurized gas,  it is dangerous goods, the courier cost is very high, say about USD 100-200 for 2kg parcels.  And the freight cost need to be prepaid by customers.
Q7: How do you make our business long-term and good relationship?
A:1. We keep good quality and competitive price to ensure our customers benefit ; Only you win first, and then we can win.
A2. We respect every customer as our friends and we sincerely do business and make friends with them,Â
no matter where they come from.
Why to be AEROPAK distributor?
1.AEROPAK is US Style design with US standard quality and net weight.
2.AEROPAK products passed required tests and certificates like RoHS, REACH, etc..
3.AEROPAK is individually barcoded for every item and every color, which is good for stock control and retailing.
4.AEROPAK offers POS & SKU CSV information and English Flyers.
5.AEROPAK offers PDF & Printed Catalogue and Colorcharts.
6.AEROPAK's strong R&D will make more and more new products to expand your market shares.
7.AEROPAK will offer great support for your sales, including your information on our website, cans, catalogue and colorcharts, etc., and will offer many differnt gifts for your promotion, even will also support you for your local trade show.
8.AEROPAK will benefit you a reward of 1-2% of your yearly salesvolumet, according to your yearly order amount.
9.AEROPAK will accept upto 10% OA (Open Acount) according to your yearly order amount.
10.AEROPAK will invite our GOLD DISTRIBUTORS to China for a 7-days traveling.Â
Â
Item No.
APK-8201
Can Size
65mm x 158mm H
Package
400ml x 12PCS/CTN
Carton Size
275x205x205 mm
20ft Container Loading
2500 cartons
• Meets SMACNA HVAC Duct Construction Standard For Mechanical Fasteners.
• All Steel Used In HAWA Insulation Fasteners Meets ASTM-A591.
• Metal Gauge: 28 Gauge Galvanized.
Model NO.: APK-8301
Use: Car Care and Auto Maintenance
Expiration Date: 3 Years
Volume: 450ml
Propellant: LPG
Service: OEM/ODM
Bottle: Tinplate Can, Aluminium Can
Factory: Available
Function: Cleaner, Protection
Trademark: AEROPAK
Transport Package: 450ml/PC; 12PCS/CTN; 2500ctns/20′fcl
Specification: RoHS, Reach, TUV, SGS
Origin: Guangdong, China(Mainland)
HS Code: 34022090
Model NO.: APK-8301
Use: Car Care and Auto Maintenance
Expiration Date: 3 Years
Volume: 450ml
Propellant: LPG
Service: OEM/ODM
Bottle: Tinplate Can, Aluminium Can
Factory: Available
Function: Cleaner, Protection
Trademark: AEROPAK
Transport Package: 450ml/PC; 12PCS/CTN; 2500ctns/20′fcl
Specification: RoHS, Reach, TUV, SGS
Origin: Guangdong, China(Mainland)
HS Code: 34022090