A bread refrigerated truck is a closed van transporter used to transport frozen or fresh-keeping goods. The refrigerated truck is a refrigerated special transport vehicle equipped with a refrigeration unit and a polyurethane insulated box. The refrigerated truck can be used by the manufacturer and the chassis. Classification by bearing capacity and compartment type. Bread refrigerated trucks are commonly used to transport frozen food (frozen cars), dairy products (milk transport vehicles), vegetables and fruits (fresh freight transport vehicles), vaccine drugs (vaccine transport vehicles) and so on. The bread refrigerated truck consists of the walking part of the special car chassis, and the heat insulation car body (generally composed of polyurethane material, glass steel, color steel plate, stainless steel, etc.), refrigeration unit, cabin interior temperature recorder and other components, for special requirements of the vehicle. Such as meat hook car, can be added with meat hooks, waist, aluminum rails, ventilation slots and other optional parts. Futian G7 country five bread refrigerated truck Standard configuration engine model: 4Q20M Engine manufacturer: Beiqi Foton Motor Co., Ltd. engine capacity: 1998 engine 130 horsepower Dimensions ( length / width / height ) : 5320×1695×2500 Cargo compartment ( length / width / height ) : 2930x1360x1450 Total mass (Kg) : 3150 Load mass utilization factor: Curing quality (kg) : 2145 Rated load mass (kg) : 875 Wheelbase (mm) : 3050 Axle load: Number of axes: 2 Number of springs: -/4 Number of tires: 4 Tire specifications: 195R15C Standard: 2930x1360x1450 box size is approximately 5.6 square, 8 cm thickness of the envelope. The inner and outer plates are made of special glass fiber reinforced plastic for refrigerated trucks (reflecting sunlight), the middle interlayer is polyurethane foam insulation material, and the fireproof and flame-retardant heat-insulating large-ton 1000-ton press is pressed. The cabinet is made of stainless steel locks and stainless steel. Wrap angle, stainless steel door frame with ceiling light and bumper block. Our factory's refrigerated and insulated car insulation materials use imported grade XPS , water absorption rate ≤ 1 , thermal conductivity ≤ 0.028W/mk, compressive pressure ≥ 150Kpa, density 30 ~ 45kg/m3 , using the most advanced fifth-generation fully enclosed polyurethane in the world. Plate bonding structure, the surface material of the panel is made of glass fiber reinforced plastic, stainless steel, aluminum alloy, color steel plate and other materials. The car body has the advantages of light weight, high thermal insulation coefficient, strong impact resistance, no leakage, etc. , water and acid, alkali, salt and other media have good corrosion resistance and aging resistance. By optimizing the design, the vehicle's center of mass is reduced and the effective volume is increased. After testing, the integrated energy of the vehicle, the life of 1 to 2 times higher than the average Refrigerated compartment. Jinbeiguowu 5.6 side pack refrigerated truck Standard configuration engine model: V20 Engine manufacturer: Mianyang Xinchen Power Machinery Co., Ltd. Dimensions ( length / width / height ) : 5070×1690×2425 Cargo compartment ( length / width / height ) : 2 90 0×1380×1450 Total mass (Kg) : 2800 Maximum speed: 130 (km/h) : Curing quality (kg) : 1750 Rated load mass (kg) : 920 Wheelbase (mm) : 2590 Axle load: 1280/1520 Number of tires: 4 Tire specifications: 1 9 5R14 Identification code: LSYKDAAB××××××××× According to the standard: GB18352.5-2013 Refrigeration units: the car uses Chinese-made snow (overhead refrigeration unit refrigeration effect is good, fast cooling, lowest temperature of minus 15 degrees to zero can be adjusted, excellent quality of the brand unit, sale Genius. Standard configuration: The box size is: length 2 90 0 * width 1380 * height 1450 is about 5.6 cubic meters. The inner arc of the car . The inner plate is made of special glass fiber reinforced plastic for refrigerating trucks (reflecting sunlight), the middle interlayer is polyurethane foam insulation material, and the fireproof flame-retardant heat insulation is pressed by a large 1000-ton press. The cabinet is made of stainless steel locks and stainless steel. Wrap angle, stainless steel door frame with ceiling light and bumper block. An aluminum alloy air guiding groove can be added, and the air guiding groove can evenly blow the cold air to the bottom of the car body. Our factory's refrigerated and insulated car insulation materials use imported grade XPS , water absorption rate ≤1 , thermal conductivity ≤0.028W/mk, compressive pressure ≥150Kpa, density 30 ～ 45kg/m3 , using the most advanced fifth-generation fully enclosed polyurethane in the world. Plate bonding structure, the surface material of the panel is made of glass fiber reinforced plastic, stainless steel, aluminum alloy, color steel plate and other materials. The car body has the advantages of light weight, high thermal insulation coefficient, strong impact resistance, no leakage, etc. , water and acid, alkali, salt and other media have good corrosion resistance and aging resistance. By optimizing the design, the vehicle's center of mass is reduced and the effective volume is increased. After testing, the integrated energy of the vehicle, the life of 1 to 2 times higher than the average Refrigerated compartment. This model is in line with the standard of the blue card, can be on the blue card, C certificate can be opened, can enter the urban area Futian IX5 country five 2 side package refrigerated truck Standard configuration engine model: DAM15DL Engine manufacturer: Harbin Dongan Automobile Power Co., Ltd. engine capacity: 1498 Engine power 85KW 115 hp Dimensions ( length / width / height ) : 4505 × 1 725 × 1980 Cargo compartment ( length / width / height ) : 1600 x1 20 0x1 02 0 Total mass (Kg) : 1820 Load mass utilization factor: Curing quality (kg) : 1375 Rated load mass (kg) : 315 Wheelbase (mm) : 3050 Axle load: Number of axes: 2 Number of springs: -/4 Number of tires: 4 Tire specifications: 1 8 5R1 4 Standard configuration: The cabinet size is 1600 x1 20 0x1 02 0 about 2 squares . Inner arc-shaped car body, inner and outer plates are made of special glass fiber reinforced plastic for refrigerated trucks (reflecting sunlight), the middle interlayer is polyurethane foam insulation material, (fire-retardant and heat-insulating), large-scale 1000-ton press is pressed, and the configuration box The body is all stainless steel locks, stainless steel wrap angle, stainless steel door frame, with ceiling lights and anti-collision blocks. Our factory's refrigerated and insulated car insulation materials use imported grade XPS , water absorption rate ≤ 1 , thermal conductivity ≤ 0.028W/mk, compressive pressure ≥ 150Kpa, density 30 ~ 45kg/m3 , using the most advanced fifth-generation fully enclosed polyurethane in the world. Plate bonding structure, the surface material of the panel is made of glass fiber reinforced plastic, stainless steel, aluminum alloy, color steel plate and other materials. The car body has the advantages of light weight, high thermal insulation coefficient, strong impact resistance, no leakage, etc. , water and acid, alkali, salt and other media have good corrosion resistance and aging resistance. By optimizing the design, the vehicle's center of mass is reduced and the effective volume is increased. After testing, the integrated energy of the vehicle, the life of 1 to 2 times higher than the average Refrigerated compartment.  Standard configuration engine model: SOFIM8140.43S5 Engine manufacturer: SOFIM8140.43S5 engine capacity: 2798 engine 130 horsepower Dimensions ( length / width / height ) : 4850 × 2000 × 2 735 Cargo compartment ( length / width / height ) : 2 10 0x1 58 0x14 8 0 Total mass (Kg) : 3 75 0 Load mass utilization factor: Curing quality (kg) : 2 390 Rated load mass (kg) : 1165 Wheelbase (mm) : 2800 Axle load: Number of axes: 2 Number of springs: -/ 6 Number of tires: 4 Tire specifications: 215/75R16LT  Standard configuration: The cabinet size is 2 10 0x1 58 0x14 8 0 about 5 squares. The inner and outer plates are made of special glass fiber reinforced plastic for refrigerated trucks (reflecting sunlight), the middle interlayer is polyurethane foam insulation material, and the fireproof and flame-retardant heat-insulating large-ton 1000-ton press is pressed. The Circular Mesh Disc
Product Name: stainless steel filter
FAQ:
Q1: What problems can I solve for you? Wire Mesh Disc,Circular Mesh Disc,Stainless Steel Filter Disc,Stainless Steel Mesh Filter Discs Balanat Import&Export Co.,Ltd. , https://www.balanatwiremesh.com
Vehicle configuration: Futian New Landscape G7 luxury body, Foton 130 HP five gasoline engine, 5- speed gearbox, direction assist, air conditioning, load-sensing proportional valve 
Chassis configuration: Mianyang Mali Guo Chen five engine power 110, 5-speed gearbox, brake oil, a cab air conditioner with the original, the direction of power, displacement 2.02, steel tire 195, 2590 wheelbase, ABS. 
Vehicle configuration: Fukuda wind SUV body gamma way, 115 hp 1.5 States five displacement gasoline engine, 5-speed transmission, with the original air-conditioning the cabin, the direction of power, electric window, central locking, key fob, 185 vacuum tire.  
Vehicle configuration: Iveco Sophie 130 horsepower five diesel engine, V35 type Turbo Daily series, single row, rear single tire, ABS, front solid disc rear disc brake, fuel tank: 70L , rear double door, cargo compartment all blind Window, 110A motor, electric glass, 4KW air conditioner, 215R16LT tire, Iveco 2826.5 gearbox, emission: Guowu
Main materials: 304, 304L, 316, 316L, etc.
Performance: acid resistance, alkali resistance, high temperature resistance, tensile strength and wear resistance.
Filter diameter: 5 mm to 600 mm.
Filter shape: rectangle, circle, ring, waist and other special-shaped mesh
Uses: used for screening and filtration in acid and alkali environment, as mud screen in petroleum industry, as screen screen in chemical fiber industry, as pickling screen in electroplating industry.
According to the process: 1, multi-layer spot welding filter. 2. Multi layer edge filter.
According to the shape: rectangle, circle, ring, distance, waist, special-shaped, etc.
According to the structure: single layer screen, multi-layer composite filter, combined filter.
According to the number of layers: single layer, double layer, three layer, four layer, five layer, multi-layer.
If you have problems in filtering, I can give you suggestions, recommend products and customized solutions.
According to the feedback from my customers, the average life of my product is 10% - 15% longer than that of others.
All specifications are available in stock.
Material are purchased from one of the most famous material company in China.
Equipments are imported from Japan and Germany.
Products have accurate mesh and wire diameter, good roundness to meet all your filtering needs.
Q2: What services can I offer for you?
Every product has passed strict parameter test and element content test, quality inspection report and material list can be provided.
Sufficient inventory, continuous and stable supply, perfect process to avoid mistakes, you can go to bed after you place an order.
Exquisite packaging to protect goods from the damage during transportation.
You can also customize the label or logo.
The status of production and transportation can be provided at any time.
Q3: What are the differences in my factory?
Family business inherits the wisdom of three generations.
Export and supply to export companies for 20 years.