In the LED transparent screen market, there are fewer large-scale enterprises with R&D strength in China, and the technical level of product R&D is not enough. In the face of the increasing market of dance beauty, who can achieve technological breakthroughs and achieve mass production will become LED transparent screens. The leading company in the industry.
Many merchants will have the same use concerns. In the process of using the product LED transparent screen, after a long time, the product will inevitably need to be maintained from time to time. Many people are still relatively unfamiliar with the concept of LED transparent screen. At present, LED transparent screens have been gradually applied in major cities such as office buildings, commercial complexes, and shop windows. So, how does the LED transparent screen need to be maintained daily?
Tell everyone to pay attention to the following points in the process of routinely maintaining the LED transparent screen:
1. Keep the power supply stable, the grounding protection is good, and try not to use it in the harsh natural environment (such as strong lightning weather);
2. It is strictly forbidden to enter the water, iron powder and other easily conductive metal objects. The transparent LED display should be placed in a low-dust environment as much as possible. Large dust will affect the display effect, and too much dust will cause damage to the circuit;
3. If water enters due to various reasons, please immediately turn off the power and contact the maintenance personnel until the display panel in the screen is dry before use.
4. The surface is stained with dust. Please remove it from the vacuum cleaner or air gun installation. (Do not wipe with a rag or the like, do not use force to prevent the screen from falling off);
5, usually maintenance using a vacuum cleaner, air gun facilities to remove dust from the air. Do not use a cloth that is too hard or rough to be wiped clean to prevent damage to the surface of the product;
6. It is recommended that the LED display rest time is more than 2 hours per day. In the rainy season, the LED screen should be used at least once a week. Generally, the screen is turned on at least once a month, and it is lit for more than 2 hours;
7, LED display should be checked regularly for normal work, the line is not damaged, if it is not working, it should be replaced in time, the line should be repaired or replaced in time;
8. Do not be in full yellow, full red, full green, etc. for a long time during playback, so as to avoid excessive current, excessive power supply, and damage to the LED light, which will affect the service life of the display. Do not disassemble at will, splicing the screen;
9. If the internal circuit of the LED display fails, non-professionals are forbidden to touch, so as to avoid electric shock or damage to the line; if there is a problem, please consult the professional.
In addition, the daily maintenance of the LED transparent screen is also very important, regularly clean the dust accumulated on the screen, so as not to affect the heat dissipation function. When playing advertising content, try not to be in full white, full-clear, etc. for a long time, so as to avoid current amplification, cable heating and short-circuit failure. When playing a holiday at night, you can adjust the brightness of the screen according to the brightness of the environment, which not only saves energy, but also prolongs the service life of the LED display.
The system reduces the internal temperature of the display by intelligently adjusting the operating state of the display. When the intelligent adjustment can't lower the temperature to the set target, the system will alarm by the staff setting mode, and provide the abnormal box position to notify the staff to deal with it in time. Ensure the normal working state of the display.
Busbar Machine
CNC busbar servo bending machine is the computer-controlled equipment dedicated for busbar bending, performing various bending operations through the coordination of X-axis and Y-axis movements, assisted with manual feeding. The selection of different dies can complete the plane bending, side bending and other processes of busbar. The machine can be used in combination with GJ3D software, and is able to accurately calculate the spread length of the bend. As to the frequently bent workpiece, it can automatically find the bending order to achieve programming automation, simulate the bending order to place busbar and avoid errors in determining the bending positions.