Model NO.: various
Experience: More Than 50 Years
Factory Area: 55000m2
Installation: Under Our Engineer′s Guide
After Sale Service: for The Whole Using Life
Trademark: ZK
Transport Package: Standard Export Packing
Specification: various
Origin: Zhengzhou, China
HS Code: 8417
Cement Dust Collectors Manufacturer
Product Introduction

baghouses (also called pulse jet baghouse, pulsejet dust collectors, etc...) are self contained, fully automated where needed. We also supply and install ducting, access platforms, ventilation and instrumentation. Baghouses are engineered for dusts of 3 microns and larger, in the following applications:
  • Woodworking
  • Cement production
  • Powder processing
  • Steel melting
  • Material handling
  • Primary metals, including steel-making
  • Metals fabrication: grinding, sawing, sanding, polishing
  • Papermaking
  • Mixing and blending options
  • Mining
  • Foundries
  • Glass Plants
  • Battery Plants
  • Universities

Cement Dust Collectors Manufacturer

We offer a full range of collector designs and media choices to solve the toughest pollution control problems involving high temperatures, pressures and corrosives. Capacities to 200,000+ CFM.

Rugged construction is standard
All-welded fabrication for operation to ±20" WG (rectangular models); 11 gauge, 12 vertical wire cages are standard. Top and side bag models are available.

Cement Dust Collectors Manufacturer

Feature

1. It has modern design, it uses lower gas inlet structure, the rough high temperature granules directly drop to the dust hopper and effectively protects the filter bag.

2. It uses long filter bags and it has smaller floor area in case of equal processing capacity, therefore it is more convenient for reconstruction of old factories.

3. It uses separate chamber offfline dust clearingwith high efficiency and few secondary flour dust attachment, in the meantime, it can effectively reduce the equipment energy consumption, the fatigue level of filter bag and pulse valve is correspondingly reduced and the service life of filter bag and vane is prolonged by several times and equipement operation cost is remarkably reduced.

4. The overhaul and bag replacement can be carried out for separate chambersunder the condition that system blower and system run normally.

5. The filter bag inlet used spring tension structure, it is convenient to disassemble & assemble and it has good tightness.

6. The case uses airtightness designand it carries out leak detecting with oil and reduces air leak to the maximum extent.

7. The whole set of equipment is controlled by PLCto realize automatic dust cleaning, dust removal, automatic temperature control and over temperature alarm.

Cement Dust Collectors Manufacturer
Company Name: Henan Zhengzhou Mining Machinery Co., Ltd.
Official Website: http://www.hnzkmachine.com
24-hour Free Sales Consulting Phone: 861-0371 -5590 2866.
Company Address: Qiaolou caizhai industrial estate, Xingyang city, Henan Province
Please pay attention to the company's other products:
Price of rotary kiln: http://www.hnzkmachine.com/calcining.html
Rotary Kiln:http://www.hnzkmachine.com/calcining.html
Preheater: http://www.hnzkmachine.com/calcining/8.html
Cement Mill: http://www.hnzkmachine.com/grinding/17.html
Rotary Dryer: http://www.hnzkmachine.com/calcining/116.html
Raw Mill: http://www.hnzkmachine.com/grinding/16.html
Trommel Screen:http://www.hnzkmachine.com/separating/137.html
Rotary cooler:http://www.hnzkmachine.com/calcining/6.html

Dust Collector's parameter:

Model

PPC128-6

PPC128-9

PPC128-10

PPC128-2×6

PPC128-2×7

PPC128-2×8

Volume(m³/h)

67300

100900

112100

134600

157000

179400

Air speed(m/min)

1.2-2.0(Speed varies at different dust points)

Filtration aream2)

935

1402

1558

1869

2181

2492

Net filtration area(m2)

779

1246

1402

1713

2025

2336

No. of bag(pc)

768

1152

1280

1536

1792

2084

Resistance(Pa)

1470-1770

Minus pressure(Pa)

7000

Dust content at inlet(g/m³)

<1300

Dust emission(g/m³)

≤0.1

Compressed air

Pressure(Pa)

(5-7)×105

 

 

Air consumption

3.6

5.4

6

7

8.3

9.5

 

(m³/min)

Pulse valve

Qty(pc)

12

18

20

24

28

32

Size

2-1/2″

Elevation valve

Qty(pc)

6

9

10

12

14

16

 

Size(mm)

Valve Φ725,air tank Φ100

Discharge device YJD-26

Outlet 300×300mm Capacity 24m³/h

Double flap valve 305×915

Screw conveyor

Model

Dia. Φ300,capacity 21m³/h

N/A

Gearbox

XWD2.2-5-1/43,power 2.2Kw

N/A

Air slide

Air slide 250mm,flow rate 2.0m³/m2,  Pressure 6860pa,If the dust content exceeds 700g/m³ at inlet, bag filter with big screw conveyor should be considered.

Bag size and material

Dia.×lengthΦ130×3050,Gross weight of polyethylene felt 450g/m2,temperature 120°C

Insulation area(m2)

125

196

205

223

247

262

Total weight(approx.)(Kg)

24120

31680

34680

43920

52680

60000

Note 1: Net filtration area means the area of one chamber during dust removing. 

      2: The compressed air consumption is based on supply of compressed air pipe from an air compression station. The consumption should be considered to be 1.3 times more if the supply is provided by an independent air compressor.

 

Model

PPC128-2×9

PPC128-2×10

PPC128-2×11

PPC128-2×12

PPC128-2×13

PPC128-2×14

Volume(m³/h)

201900

224300

247600

269100

291600

314000

Air speed(m/min)

1.2-2.0(Speed varies at different dust points)

Filtration area(m2)

2084

3115

3427

3738

4050

4361

Net filtration area(m2)

2648

2959

3271

3582

3894

4205

No. of bag(pc)

2304

2560

2816

3072

3328

3584

Resistance(Pa)

1470-1770

Minus pressure(Pa)

7000

Dust content at inlet(g/m³)

<1300

Dust emission(g/m³)

≤0.1

Compressed air

Pressure(Pa)

(5-7)×105

 

 

Air consumption

10.7

12

13.1

14.3

15.5

16.7

 

(m³/min)

Pulse valve

Qty(pc)

36

40

44

48

52

56

Size

2-1/2″

Elevation valve

Qty(pc)

18

20

22

24

26

28

 

Size(mm)

Valve Φ725,air tank Φ100

Discharge device YJD-26

Outlet300×300mm,Capacity 24m³/h

Double flap valve 305×915

Screw conveyor

Model

Dia. Φ300,capacity 21m³/h

N/A

Gearbox

XWD2.2-5-1/43,power 2.2Kw

N/A

Air slide

Air slide 250mm,flow rate 2.0m³/m2,  Pressure 6860pa,If the dust content exceeds 700g/m³ at inlet, bag filter with big screw conveyor should be considered.

Bag size and material

Dia.×lengthΦ130×3050,Gross weight of polyethylene felt 450gm2,temperature 120°C

Insulation area( m2)

277

292

307

322

337

352

Total weight(approx.)(Kg)

66480

72000

78480

86400

93600

100800

Note 1: Net filtration area means the area of one chamber during dust removing.  

         2: The compressed air consumption is based on supply of compressed air pipe from a air compression station. The consumption should be considered to be 1.3 times more if the supply is provided by an independent air compressor.

Company information:
Henan Zhengzhou Mining Machinery Co., Ltd. was founded in 1956 and it is the designated manufacture plant of National Mechanical & Electrical Industry Bureau in Henan Province for cement building materials and beneficiation equipments. After more than half a century of development, Henan Zhengzhou Mining Machinery Co., Ltd has developed to an area of 70000 square meters, plant construction area of 40000 square meters with six modern workshops, two heavy machinery workshops, one Municipal Technology Center and more than 260 sets of machining, assembling, welding and other equipments. Its fixed asset value has exceeded 100 million RMB. Henan Zhengzhou Mining Machinery Co., Ltd has become an integrated modern enterprise with scientific research, design, development, manufacturing, sales, installation, commissioning and training services.The main products of company include: ball mill, rotary kiln, vertical preheater, cooler, crusher, metallurgical coke oven, magnetic separator, flotation machine, classifier, feeder, bucket elevator, preheater, dust collector, elevator, drier, and other equipments relate to metallurgy, cement, lime, mineral processing, refractory, chemical industry. The products of Henan Zhengzhou Mining Machinery Co., Ltd have been sold to every province of China and exported to Russia, Korea, Vietnam, Malaysia, Nepal, Bangladesh, Mexico, Armenia, Africa, South America and other countries and regions. 

Cement Dust Collectors Manufacturer

Packaging Detail :
The main machinery is in nude packing and spare parts in Wooden or steel box standard export packing, suitable for long distance delivery.

We can arrange the shipping to your door.

Cement Dust Collectors Manufacturer
FAQ

According to your requirements,the most suitable machines will be designed for your workpieces please indicate the following details.

1.what kind of workpiece will you clean ?

2.The workpiece size,length ,width and height of maximum workpiece?

3.How many workpiecs do you want to clean per day ?

Based on this question,the detailed technical proposals will be sent to you for reference.

Solvent Recovery Machine industry wide application, uses a wide range of production and processing industry basically will be used, kinds of solvent solvent Recovery Machine Recyclable are many, Calstar® is a solvent recovery machine equipment, it can help many enterprises to save most of the money, reduce the purchase cost of solvent, solvent recovery machine was born to the society has an important significance to the environment, reduce the waste of resources, and solve the environmental pressure.
At present, to promote energy saving and emission reduction, the development of low-carbon economy has become the main theme of the development of the world economy, especially for China which is a relative shortage of resources per capita, serious ecological damage power development, in the huge pressure of energy and environment, promote energy-saving emission reduction, it is imperative to develop low carbon economy. In the Copenhagen world climate conference held in December 2009, the Chinese government commitment to the 2020 unit of GDP carbon emissions than in 2005 decreased by 40% ~ 45%. In the future, all walks of life will move towards low energy consumption, low pollution and low emission direction, the development of flexible packaging industry can not be contrarian. Soft packaging industry as one of the more serious energy consumption and pollution, in the face of increasingly prominent energy and environmental problems, should assume more social responsibility, to contribute to energy saving and emission reduction.
In China to use a large number of organic solvents, emissions of a large number of high concentration of organic waste gas is an important cause of environmental pollution caused by the soft packaging industry. At the same time, the evaporation of organic solvent in the process of use also caused the problem of indoor pollution and safety. With the increase of people's awareness of environmental protection and national environmental protection, organic emission problem of the soft packaging industry has aroused social attention, soft packaging enterprises also obviously feel the increasing pressure of environmental protection, high discharge mode used by now has been difficult to project eia. Moreover, the future of national legislation in the field of environmental protection will be more stringent, flexible packaging enterprises must be a pressing matter of the moment to take effective measures to reduce emissions and energy consumption of organic waste gas, in accordance with the national energy-saving emission reduction targets

Electronic Factory Solvent Recovery Machine

Electronic Factory Solvent Recovery Machine,Solvent Recovery Unit,Paint Thinner Recycling Machine,Solvent Recovery Plant

SHENZHEN KUANBAO ENVIRONMENTAL EQUIPMENT CO., LTD , https://www.calstarkb.com