Dongfeng small cleaning suction truck configuration: chassis model DFA1070SJ35D6, wheelbase 3300, light hair D28D11-4DA engine 115 horsepower with supercharged or facing Chai 100 horsepower engine, ternary destruction, exhaust gas purification, frame 130-192, front axle 2 rear axle 4, rear axle speed ratio 6.124, tire 7.00R16, single row, turnable, 12V circuit, direction assist, steam brake, clutch boost, gearbox 528 (A92), product name; CSC5070GQW4 type cleaning suction truck total Quality (Kg) 7300 rated load mass (Kg) 2300 curb weight (Kg) 4805, external dimensions (mm) 6200 × 1990 × 2650; suction tank effective volume 3.0 cubic meters, tank dimensions (length × diameter) ( Mm): 3100 × 1200. Water tank 2 square. The high-pressure cleaning and suction-increasing one-car of the new water tank on both sides not only has a beautiful appearance, but also has convenient functions and functions. The design of the car is changed and upgraded in the appearance of the original suction truck. The suction tank can still be lifted, and the rear cover can be opened. Only the water tank is installed on both sides of the tank, and the water tanks on both sides are used for high pressure. It is used for cleaning pipelines and installs imported high-pressure dredging pump to solve the design of the traditional integrated tank to kill the partition in the middle of the tank. The high-pressure water and dirt are separated, which greatly reduces the weight of the suction tank and increases the weight. Pressurize the life of the hydraulic cylinder. main feature The cleaning suction truck is a special vehicle that combines the functions of the suction truck and the cleaning truck. 1. The suction truck is a new sanitation vehicle that collects, transfers, and cleans the transported sludge to avoid secondary pollution. The suction truck has high suction efficiency, self-priming, self-discharging and self-unloading functions. The suction pump is full of tank time ≤ 6min; suction stroke ≥ 5 meters, with long service life, high vacuum, fast working speed and convenient operation. , convenient transportation and so on. With alarm and anti-overflow device, with suction window. 2, cleaning system: the pressure of the high-pressure cleaning pump is 16mpa, with the functions of dredging and dredging of the sewer. ã€The main technical parameters】 Product trademark Chusheng Announcement Lot 278 Product name CSC5070GQW4 cleaning suction truck Product No.ZLXZX4ZA018 Total mass (Kg) 7300 Tank volume (m3) 3.0 Rated load mass (Kg) 2300, 2365 Dimensions (mm) 6200×1990×2650 Curing quality (Kg) 4805 Cargo size (mm) × × Rated passenger (person) Quasi-trailer total mass (Kg) Number of passengers in the cab (person) 3,2 Load mass utilization factor Approach angle / departure angle (°) 19/14 Front overhang / rear overhang (mm) 1032/1868 Number of axes 2 Wheelbase (mm) 3300 Axle load (Kg) 2920/4380 Maximum speed (Km/h) 95 Other 1, the effective volume of the tank is 3.0 cubic meters, transportation medium: liquid dirt, density: 800 kg / cubic meter, tank dimensions (length × diameter) (mm): 3100 × 1200. 2, side protection using cold bending Profile steel Q235, bolted. The rear protection is made of cold-formed steel Q235, welded, the rear protection section is 200mm high, the section width is 50mm, and the lower edge is 450mm higher than the ground. 3. Optional cab with chassis. (This article is from Xugong) Sandwich Panel Machine is a integrated production line consisting of a Roll Forming Machine and a sandwich panel laminating system. The roll forming machine and the laminating system can be operated separately. The roll forming machine consists of decoiler, main body and post-cut equipment. The laminating system consists of feeding, glue, heating, laminating and post-cutting.
The line can produce single corrugated sheet, and can also produce the sandwich panel with rabbet joint and sandwich panel.
The sandwich panel machine has two different systems: Pu sandwich panel machine and EPS sandwich panel machine according the different laminating Technology.
Related Products:pu sandwich panel machinery.
Sandwich Panel Machine Sandwich Machine,Sandwich Panel Machine,Automatic Sandwich Making Machine,Sandwich Panel Roll Forming Machine HangZhou Roll Forming Machinery Co.,Ltd , http://www.m-rollformingmachine.com
Suction tank capacity 3 cubic meters / cleaning tank volume 2 cubic meters 
The whole machine is under control of PLC.