Zinc Die Casting Auto Parts are a metal forming process in which molten zinc metal is put under pressure and injected into a die.
Zinc are alloys that have high strength and hardness, outstanding corrosion resistance,full recyclability, mechanical properties, high thermal and electrical conductivity and strength at high temperatures. Zinc alloys possess high dimensional stability for complex shapes and excellent thin walls. The cost of raw material is low.
Zinc Die Casting Auto Parts are efficient and economical and offers a wide range of durable shapes and components. Little or no machining is required after a part is die casted, because the process provides very close tolerances for even complex shapes. Zinc Die Castings can also be easily plated or finished. Zinc Die Casting Auto Parts are dimensionally stable and heat resistant.
Zinc Die Casting Auto Parts Zinc of Auto Parts, Zinc Die Casting Parts, Zinc Die Casting of Auto Parts, Zinc Casting of Auto Parts NINGBO ZHENHAI BOLANG METAL PRODUCT FACTORY , https://www.bldiecasting.com
another:
1: The CT and PT accessed by the protection device are protection levels (such as PT3P and CT5P20), and they cannot be replaced or mixed with measurement and measurement.
2: Because the power meter requires the power company to review, so try to purchase common well-known power meter brands, such as Changsha Wasion, or purchase the power company designated brand, to avoid power companies to find trouble.
Multi-function power meter is a measuring meter. The meter is only used for display, monitoring, etc. It can be reset to resettable and changeable ratio. The accuracy level of CT and PT for meter access is also measurement level (usually 0.5), while the meter meter (usually called a power meter) cannot be cleared and cannot be reset and cannot be changed (the meter's manufacturer can only provide the professional software for the power company, so the meter needs to be certified by the power company. The accuracy grades of CTs and PTs that are accessed are also measured (usually 0.2s or 0.2). Therefore, the meter (power meter) and measurement meter (multi-function power meter, ammeter, voltmeter, etc.) cannot replace each other.