Whether it is a driver's license test or daily driving, we often need to have an accurate judgment of the wheel position. So how do we judge the location of the tires? Today Xiao Bian will teach you how to accurately look at the point and determine the wheel position. 1, the determination of the position of the left wheel Judging from where the revolver will roll, you can avoid tires pressing against solid lines or avoiding potholes on the road. When our line of sight passes through the joint of the left wiper protrusion and the object on the ground, our revolver will pass over the object as it travels. For example, in the following figure, we overlap the wiper node with the centerline of the ground and the tire will be pressed from the centerline. 2, from the center line of 60 cm When driving daily, it is safe to leave 60 centimeters from the centerline. When our line of sight coincides with the midline through the intersection of the panel and the A-pillar, the body is just 60 centimeters from the midline. 3, determine the position of the right wheel When we look through the right wiper and the target intersect, the tire will be pressed from the target. For example, in the figure below, we overlap the wiper node with the centerline of the ground, so the tire will be pressed from the centerline. 4, the right side of the road from the road 60 cm When the right sprinkler overlaps with the roadside target, the body is 60 cm from the side of the road 5, right side parking When the right wiper node coincides with the roadside, the direction is slightly pulled to the left, you can achieve 10 cm away from the side of the road to stop the effect of Because of their different heights, everyone will see a slight difference. Xiao Bian gives you two solutions: First, when you park your car in a suitable location, record your own watch marks, such as the wiper node in the picture, you can see the rivets, in short, find a memory that is right for you and accurate Signs; Second, adjust the seat, or add cushions, so that their point of view is just in the state of the map, because the wiper node, sprinkler nodes are more convenient to see and memory points, so this is also More practical.
Most kinds of plastics could be processed by plastic pyrolysis machines.
the main plastics will be PP PE with high oil output
PVC or PET is not suitable for pyrolysis machines
there will be Cl generated from its process
when met with water, there will be HCL,
it is harmful to reactor and all the whole plastic pyrolysis system.
the main process is that by heating the reactor directly, plastics will be pyrolysised into oil gas;
condensers or cooling pipes will cool the gas down into liquid oil with the help of recycling water;
then the rest gas which could not be cooled down into liquid oil will be recycled into reactor heating system; after oil gas coming out completely, stop heating the reactor, and cool down reactor below 70 degrees; then can open the door and discharge carbon black automatically...
there are models with capacities from 5tons to 20tons per batch
LN-2200-6000 capacity of 5-6ton
LN-2200-6600 capacity of 7-8ton
LN-2200-8000 capacity of 9-10ton
LN-2600-6600 capacity of 10-12ton
LN-2600-8000 capacity of 12-14ton
LN-2800-6000 capacity of 10-12ton
LN-2800-6600 capacity of 12-14ton
LN-2800-8000 capacity of 15-20ton
if cut into smaller pieces, it could process more.
the whole process includes feeding plastics into pyrolysis reactor;
then heating the reactor and oil gas coming out for some time;
cool down the reactor; at last open the door and discharge the carbon blacks...
Waste Plastic Pyrolysis Machine Waste Plastic Pyrolysis Machine,Plastic Pyrolysis Machine,Plastics Pyrolysis Equipment,Scrap Plastic Pyrolysis Machine Henan Lanning Technology Co., Ltd , https://www.lanningrecycling.com
