Underground Dump Truck Strengthens the full adoption of the European heavy truck chassis riveting technology, forming a frame beam, the bearing capacity of the carriage can be greatly enhanced.
According to the actual load of the version selection.
This truck is specialty designed according to roadway features,articulated steering system,turning radius small,getting through smoothly,full hydraulic steering,light and steady,low driving position,especially for narrow and small roadway transportation.And with water filtration device,environmental and low-carbon.front and rear separate,petrol dual-pipe braking,safe and reliable,8 grades gearbox for high-low,full power in walking,climbing ability strong, can reach 30%,extra-thick panel,rugged,reliable and durable.
Load : 3000kg, 5000kg,8000kg,12000kg
Underground Dump Truck Underground Dump Truck,Tipper Truck,Dump Tipper,Underground Mining Dump Truck SINO HEAVY MACHINERY CO., LTD. , https://www.sinoauto-machinery.com
2. If the test line is short-circuited and the high and low voltages are reversed, the fuse will be blown. After the fuse is blown, if the measurement is made, stop it after the message "Please wait!" is displayed. Please shut down, replace the same amount of insurance, and retest.
3. The connection should be well protected. The instrument should be well grounded!
4. The workplace of the instrument should be kept away from strong electric fields, strong magnetic fields, and high-frequency equipment. The power supply interference is as small as possible, and the lighting line should be selected. If the power supply interferes with the product album (4 sheets) is still large, it can be charged by the AC purification power cord instrument. AC purification power supply capacity is greater than 200VA.
5. When the instrument is working, if there is a liquid crystal display disorder, there is no response by pressing any key, or the measured value is far from the actual value. Press the reset key, or turn off the power and operate again.
6. If the display has no characters or the color is very light, adjust the brightness potentiometer to a suitable position.
7. The transformer ratio tester works in a dark place and can turn on the backlight. In order to reduce the power consumption of the display, the backlight is not very bright.
8. The instrument should be stored in a dry and ventilated place.
Dear Customer:
Thank you for your attention to our products. In addition to this product introduction, the company also has insulation ladders, high-voltage insulation mats, cable fault testers, high-voltage measuring instruments, insulation boots gloves pressure test equipment, power safety equipment cabinets, etc. Introduction, if you are interested in our products, welcome to inquire. Thank you!
1. In the middle of the measurement, the ratio tester does not touch the test sample.